A John Deere F687 tractor generally needs a 5×10 utility trailer based on deck size. Use at least 9 ft (108 in) of deck length and about 5 ft (60 in) of usable deck width, then confirm payload separately.
Transport classDeck-size guide onlyTrailer type guide
John Deere F687 Trailer Size Specs
Recommended trailer size
5×10 utility trailer
Transport class
Deck-size guide only
Minimum deck length
9 ft (108 in)
Minimum deck width
5 ft (60 in)
Overall length
84 in (7 ft / 2,134 mm)
Overall width
48 in (4 ft / 1,219 mm)
Overall height
60 in (5 ft / 1,524 mm)
Wheelbase
48 in (4 ft / 1,219 mm)
John Deere F687 Trailer Fit Chart
Trailer fit size guide
Length
7 ft
Width
4 ft
Payload guide
No usable machine weight was found for this row, so this page treats the trailer answer as a deck-size fit guide only. Before hauling, confirm the real loaded weight against the trailer payload placard, ramp rating, brakes and tie-down capacity.
Will a John Deere F687 Fit on Common Trailer Sizes?
5×8 trailer
No Not recommended – shorter than the suggested 9 ft (108 in) minimum deck length. This is a deck-size verdict only because no usable tractor weight was found.
5×10 trailer
Maybe Possible by deck size only if deck length is tight, especially with attachments. Confirm trailer payload, ramps, brakes, tie-downs and attachments before hauling.
6×10 trailer
Maybe Possible by deck size only if deck length is tight, especially with attachments. Confirm trailer payload, ramps, brakes, tie-downs and attachments before hauling.
6×12 trailer
Likely Likely fits by deck size only. Confirm trailer payload, ramp rating, brakes, tie-downs and attachment weight before hauling.
6×14 trailer
Likely Likely fits by deck size only. Confirm trailer payload, ramp rating, brakes, tie-downs and attachment weight before hauling.
7×16 trailer
Likely Likely fits by deck size only. Confirm trailer payload, ramp rating, brakes, tie-downs and attachment weight before hauling.
John Deere F687 Trailer Setup Guide
Bare machine
Start with a 5×10 utility trailer for deck size. Because no usable machine weight was found, confirm payload on the trailer placard before hauling
Mower deck or collection system
A mower deck, bagger or collection system can increase width and weight, so check clearance between trailer fenders and side rails
Snow or rear attachments
A snow blade, snow blower, rear attachment or hitch-mounted accessory can add length and weight. Measure the real setup, not just the bare machine
Weights and loaded tires
Wheel weights, suitcase weights and loaded tires increase payload demand. Use the real loaded weight before choosing the trailer
John Deere F687 Hauling Notes
Trailer size note
For the John Deere F687, the practical trailer starting point is 5×10 utility trailer. Treat this as a deck-size fit guide for the machine; confirm payload, ramp rating and tie-down capacity separately
Deck length note
Deck length should be longer than the machine’s listed 84 in (7 ft / 2,134 mm) overall length so it can sit safely and be balanced over the axle
Deck width note
Usable deck width matters more than advertised trailer width. The John Deere F687 is listed at 48 in (4 ft / 1,219 mm) wide, so check fender and rail clearance
Payload note
No usable machine weight was found for this row, so treat this as a deck-size fit guide only. Confirm payload rating, ramp rating, brakes and tie-down capacity before hauling
Ramp and tie-down note
Check ramp capacity, ramp angle, trailer brakes, axle rating and tie-down points. A machine that fits on the deck can still be unsafe if the trailer hardware is under-rated
Height note
The listed overall height is 60 in (5 ft / 1,524 mm). This matters for enclosed trailers, garage doors, carports and low roof clearance
John Deere F687 Trailer Size FAQ
What size trailer do I need for a John Deere F687?
A John Deere F687 tractor generally needs a 5×10 utility trailer based on deck size. Use at least 9 ft (108 in) of deck length and about 5 ft (60 in) of usable deck width, then confirm payload separately
How long should a trailer be for a John Deere F687?
Use at least 9 ft (108 in) of deck length as the starting point. The machine’s listed overall length is 84 in (7 ft / 2,134 mm), and attachments can make the real transport length longer
How wide should a trailer be for a John Deere F687?
Use around 5 ft (60 in) of usable deck width as the starting point. The John Deere F687 is listed at 48 in (4 ft / 1,219 mm) wide, but trailer fenders, rails and attachments can reduce clearance
Can I choose a trailer for a John Deere F687 without a weight spec?
You can choose the deck length and width, but not the final safe payload. Use this page for physical fit, then confirm the machine’s real loaded weight against the trailer placard and ramp rating
Will a John Deere F687 fit on a 5×10 trailer?
Possible by deck size only if deck length is tight, especially with attachments. Confirm trailer payload, ramps, brakes, tie-downs and attachments before hauling
Is a utility trailer enough for a John Deere F687?
A utility trailer can work if the John Deere F687 fits the deck and the trailer payload, ramps, brakes and tie-downs are rated for the real loaded machine
Official information note
Mistakes do happen. Trailer fit can change by tire setup, mower deck, collection system, weights, attachments and trailer design. Check the operator manual, service manual, trailer placard, local transport rules and official deere.com website before hauling the tractor.
