A John Deere 1R 25 tractor usually needs a 5×10 or 6×10 utility trailer. Use at least 7 ft (84 in) of deck length, about 5 ft (60 in) of usable deck width and at least 2,250 lb (1,021 kg) of payload capacity before adding attachments.
Recommended trailer5×10 or 6×10 utility trailerStarting trailer size
Min deck length7 ft (84 in)Usable deck length
Min payload2,250 lb (1,021 kg)Before attachments margin
Transport classUtility trailerTrailer type guide
John Deere 1R 25 Trailer Size Specs
Recommended trailer size
5×10 or 6×10 utility trailer
Transport class
Utility trailer
Minimum deck length
7 ft (84 in)
Minimum deck width
5 ft (60 in)
Minimum payload rating
2,250 lb (1,021 kg)
Overall length
63 in (5.2 ft / 1,600 mm)
Overall width
48 in (4 ft / 1,219 mm)
Overall height
86.4 in (7.2 ft / 2,195 mm)
Wheelbase
63 in (5.2 ft / 1,600 mm)
Operating weight
1,797 lb (815 kg)
Shipping weight
1,797 lb (815 kg)
Engine horsepower
23.2 hp
John Deere 1R 25 Trailer Fit Chart
Trailer fit size guide
Length
5.2 ft
Width
4 ft
Payload guide
Machine
1,797 lb
Min payload
2,250 lb
Payload should cover the machine plus fuel, mower deck, collection system, weights, chains and tie-down gear.
Will a John Deere 1R 25 Fit on Common Trailer Sizes?
5×8 trailer
Maybe Possible only if deck length is tight, especially with attachments, payload should be at least 2,250 lb (1,021 kg). Check the real trailer placard, ramps, brakes, tie-downs and attachments.
5×10 trailer
Maybe Possible only if payload should be at least 2,250 lb (1,021 kg). Check the real trailer placard, ramps, brakes, tie-downs and attachments.
6×10 trailer
Likely Likely works for a bare tractor if the trailer payload, ramps, brakes and tie-downs are rated correctly.
6×12 trailer
Likely Likely works for a bare tractor if the trailer payload, ramps, brakes and tie-downs are rated correctly.
6×14 trailer
Likely Likely works for a bare tractor if the trailer payload, ramps, brakes and tie-downs are rated correctly.
7×16 trailer
Likely Likely works for a bare tractor if the trailer payload, ramps, brakes and tie-downs are rated correctly.
John Deere 1R 25 Trailer Setup Guide
Bare machine
Start with a 5×10 or 6×10 utility trailer. Confirm the listed length, width and real loaded weight before hauling
Mower deck or collection system
A mower deck, bagger or collection system can increase width and weight, so check clearance between trailer fenders and side rails
Snow or rear attachments
A snow blade, snow blower, rear attachment or hitch-mounted accessory can add length and weight. Measure the real setup, not just the bare machine
Weights and loaded tires
Wheel weights, suitcase weights and loaded tires increase payload demand. Use the real loaded weight before choosing the trailer
John Deere 1R 25 Hauling Notes
Trailer size note
For the John Deere 1R 25, a 5×10 or 6×10 utility trailer is the practical starting point. Look for at least 7 ft (84 in) of deck length, about 5 ft (60 in) of usable deck width and at least 2,250 lb (1,021 kg) of payload capacity before adding attachments
Deck length note
Deck length should be longer than the machine’s listed 63 in (5.2 ft / 1,600 mm) overall length so it can sit safely and be balanced over the axle
Deck width note
Usable deck width matters more than advertised trailer width. The John Deere 1R 25 is listed at 48 in (4 ft / 1,219 mm) wide, so check fender and rail clearance
Payload note
Use 2,250 lb (1,021 kg) as a starting payload rating. Add extra margin for fuel, mower deck, collection system, wheel weights, chains and tie-down gear
Ramp and tie-down note
Check ramp capacity, ramp angle, trailer brakes, axle rating and tie-down points. A machine that fits on the deck can still be unsafe if the trailer hardware is under-rated
Height note
The listed overall height is 86.4 in (7.2 ft / 2,195 mm). This matters for enclosed trailers, garage doors, carports and low roof clearance
John Deere 1R 25 Trailer Size FAQ
What size trailer do I need for a John Deere 1R 25?
A John Deere 1R 25 tractor usually needs a 5×10 or 6×10 utility trailer. Use at least 7 ft (84 in) of deck length, about 5 ft (60 in) of usable deck width and at least 2,250 lb (1,021 kg) of payload capacity before adding attachments
How long should a trailer be for a John Deere 1R 25?
Use at least 7 ft (84 in) of deck length as the starting point. The machine’s listed overall length is 63 in (5.2 ft / 1,600 mm), and attachments can make the real transport length longer
How wide should a trailer be for a John Deere 1R 25?
Use around 5 ft (60 in) of usable deck width as the starting point. The John Deere 1R 25 is listed at 48 in (4 ft / 1,219 mm) wide, but trailer fenders, rails and attachments can reduce clearance
What payload rating should the trailer have for a John Deere 1R 25?
Start with at least 2,250 lb (1,021 kg) of payload capacity. The listed machine weight is 1,797 lb (815 kg), but fuel, attachments, weights and tie-down gear can add more weight
Will a John Deere 1R 25 fit on a 5×10 trailer?
Possible only if payload should be at least 2,250 lb (1,021 kg). Check the real trailer placard, ramps, brakes, tie-downs and attachments
Is a utility trailer enough for a John Deere 1R 25?
A utility trailer can work if the John Deere 1R 25 fits the deck and the trailer payload, ramps, brakes and tie-downs are rated for the real loaded machine
Official information note
Mistakes do happen. Trailer fit can change by tire setup, mower deck, collection system, weights, attachments and trailer design. Check the operator manual, service manual, trailer placard, local transport rules and official deere.com website before hauling the tractor.
