The John Deere E160 tractor hydraulic pump flow is 2.5 GPM, and hydraulic system pressure is 300 psi.
Hydraulic pump flow2.5 GPM
Implement flow7.5 GPM
Total hydraulic flow7.5 GPM
Hydraulic pressure300 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity2.8 qt (0.7 gal)
John Deere E160 Hydraulic Flow Details
Hydraulic pump flow
2.5 GPM
Implement hydraulic flow
7.5 GPM
Total hydraulic flow
7.5 GPM
Hydraulic system pressure
300 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
2.8 qt (0.7 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
2.5 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
7.5 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
7.5 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
300 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
0.7 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere E160 Extra Hydraulic Notes
Hydraulic flow note
With about 7.5 GPM implement flow, the John Deere E160 sits in the low-flow compact tractor range and is best suited to loader work, steering and simple implements, but not high-demand continuous hydraulic attachments.
Hydraulic pressure note
Hydraulic pressure on the John Deere E160 is 300 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (7.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere E160 uses a closed-center pressure-flow compensated hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere E160 is 2.8 qt (0.7 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
