Quick answer:
The John Deere E160 battery size is listed as 12 V.
Voltage12 V
John Deere E160 Battery Specs
| Battery voltage | 12 V |
|---|
Battery Spec Comparisons Chart
Voltage comparison
John Deere E160 Battery FAQ
| Replacement battery recommendation | The best replacement battery for the John Deere E160 tractor is the AGM Battery, specifically designed for models like the E100, E110, E120, E130, E140, E150, E160, E170, and E180. This type of battery is maintenance-free and offers a long-term storage life |
|---|---|
| Battery voltage | The John Deere E160 tractor uses a 12-volt battery |
| Battery group size | The official John Deere E120 tractor battery group size is not specified on; however, compatible batteries listed for the E120 series include 12V AGM types such as TY23017, TY25878, and TY25221 |
| Battery CCA | The recommended official battery for the John Deere E160 tractor has a Cold Cranking Amperage (CCA) of 230. This specification ensures reliable starting performance in various weather conditions |
| Battery location | The battery on the John Deere E160 tractor is located underneath the right access step. You may need to open the flap and possibly remove the access step to access the battery |
| Battery replacement steps | To replace the battery on a John Deere E160 tractor, first disconnect the negative cable, then the positive cable, remove the battery hold-down clamp, and lift out the old battery before installing the new one in reverse order. Always service the battery safely and clean the terminals before installation. Wikipedia |
| Bad battery symptoms | Common symptoms of a bad battery in a John Deere E160 tractor include the starter not working or failing to turn the engine, corroded battery terminals, and the battery not holding a charge. If you experience these issues, it may indicate a battery problem |
Official information note
Mistakes do happen. Please check official deere.com website for official information.





