The John Deere CR125 is 44.5 in long, 36 in wide, and 40.6 in tall.
Length44.5 in (3 ft 8.5 in) / 1,130.3 mm
Width36 in (3 ft 0 in) / 914.4 mm
Height40.6 in (3 ft 4.6 in) / 1,031.2 mm
John Deere CR125 Dimensions
Overall length
44.5 in (3 ft 8.5 in) / 1,130.3 mm
Overall width
36 in (3 ft 0 in) / 914.4 mm
Overall height
40.6 in (3 ft 4.6 in) / 1,031.2 mm
Tractor Size Comparison Chart
Overall length comparison
This model
44.5 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
36 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
40.6 in
Average
79.8 in
Low
36 in
High
156 in
John Deere CR125 Extra Dimension Notes
Size class note
The John Deere CR125 should be judged as a small compact tractor before deciding if it fits storage or transport. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Fitment note
The John Deere CR125 has listed dimensions of length at 44.5 in (3 ft 8.5 in) / 1,130.3 mm, width at 36 in (3 ft 0 in) / 914.4 mm, and height at 40.6 in (3 ft 4.6 in) / 1,031.2 mm. Treat them as the starting point for storage and trailer planning.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
Leave walking room around the parked tractor if you need to service, refuel or connect implements indoors.
This is a smaller tractor class, so tight acreage sheds and small equipment bays are realistic if the doorway clears.
Storage FAQ
Will it fit in a garage?
A garage may work only when the clear opening is larger than 40.6 in high and 36 in wide, and the bay is longer than 44.5 in. For this machine, use 7 ft high, 8 ft wide, and 15 ft deep as the better rule.
What size door should I check?
Start with the hard numbers: 40.6 in high, 36 in wide and 44.5 in long. Then step up to a practical storage target of about 7 ft high, 8 ft wide, and 15 ft deep.
Do attachments change the storage size?
Yes. Treat 44.5 in as the bare length only. If front or rear gear stays fitted, add roughly 2 ft to 4 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
If posts, fences or parked equipment sit near the doorway, go wider than 8 ft. A 36 in wide tractor needs side margin when entering at any angle.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
