The John Deere 9560R is 120 in wide and 145 in tall, with a 116 in wheelbase.
Width120 in (10 ft 0 in) / 3,048 mm
Height145 in (12 ft 1 in) / 3,683 mm
Wheelbase116 in (9 ft 8 in) / 2,946.4 mm
John Deere 9560R Dimensions
Overall width
120 in (10 ft 0 in) / 3,048 mm
Overall height
145 in (12 ft 1 in) / 3,683 mm
Wheelbase
116 in (9 ft 8 in) / 2,946.4 mm
Tractor Size Comparison Chart
Overall width comparison
This model
120 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
145 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
116 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 9560R Extra Dimension Notes
Fitment note
The John Deere 9560R listed measurements are width at 120 in (10 ft 0 in) / 3,048 mm and height at 145 in (12 ft 1 in) / 3,683 mm. If one number is close to your opening size, assume you need more clearance.
Wheelbase note
The John Deere 9560R wheelbase comes through as 116 in (9 ft 8 in) / 2,946.4 mm. It adds useful context to the length figure.
Storage Tips
Large-farm storage is the right assumption for the John Deere 9560R; tight sheds will be a problem.
Recommended storage clearance: target about 192 in (16 ft) clear height; target about 168 in (14 ft) clear width.
Expect large shed requirements, especially with duals, tracks or implements fitted.
The 116 in wheelbase is useful when judging trailer position and shed maneuvering room.
Because height is over 100 in, overhead clearance is the first storage risk.
Storage FAQ
Will it fit in a garage?
This tractor’s length not captured length and 145 in height make ordinary garage storage doubtful unless the opening is oversized. Use 16 ft high, 14 ft wide as the practical benchmark.
What size door should I check?
The door should be bigger than the tractor by about 36 in of height margin and 48 in of side margin. That puts the target around 16 ft high and 14 ft wide.
Do attachments change the storage size?
Yes. A loader mainly adds depth and sometimes height; a rear implement adds depth; a mower deck or tire setting can add width beyond the listed 120 in.
How much maneuvering room should I allow?
With a 116 in wheelbase and 120 in width, leave enough straight approach to line up before the doorway. About 22 ft of clear approach is the cleaner target.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
