The John Deere 9320T dimensions give width at 141 in (11 ft 9 in) / 3,581.4 mm. This is the basic answer for whether it fits in your shed, barn or trailer space.
Tread width note
The John Deere 9320T tread dimensions come through as 141 in (11 ft 9 in) / 3,581.4 mm at the front and 136 in (11 ft 4 in) / 3,454.4 mm at the rear. That is good comparison data.
Storage Tips
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
For wider tractors, leave room on both sides instead of using the exact opening width.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears height not captured height, 141 in width and length not captured length with margin. Around 16 ft wide is the no-drama check.
What size door should I check?
Start with the hard numbers: height not captured high, 141 in wide and length not captured long. Then step up to a practical storage target of about 16 ft wide.
Do attachments change the storage size?
Yes. Treat length not captured as the bare length only. If front or rear gear stays fitted, add roughly 8 ft to 15 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
If posts, fences or parked equipment sit near the doorway, go wider than 16 ft. A 141 in wide tractor needs side margin when entering at any angle.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
