The John Deere 9320T takes 16 gal (60.6 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed The recommended coolant for the John Deere 9320T tractor is John Deere Cool-Gard II guidance.
Coolant capacity16 gal (60.6 L)Cooling system refill amount
Antifreeze mixThe recommended coolant for the John Deere 9320T tractor is John Deere Cool-Gard IIFreeze/boil protection
John Deere 9320T Coolant Capacity Specs
Coolant capacity
16 gal (60.6 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant for the John Deere 9320T tractor is John Deere Cool-Gard II
Engine horsepower
375 hp
Engine displacement
765 cu in (12.54 L)
John Deere 9320T Coolant Capacity Guide
Coolant capacity guide
This model
16 gal
Class low
15 gal
Class typical
28 gal
Class high
45 gal
Compared with a broad 9 series guide, not the full tractor dataset.
John Deere 9320T Coolant Service Notes
Coolant capacity note
For the John Deere 9320T, the coolant capacity is 16 gal (60.6 L). That is the buying and refill guide for a full cooling-system service
Coolant service note
The John Deere 9320T cooling system should be refilled close to 16 gal (60.6 L), with coolant choice guided by John Deere Cool-Gard II and The recommended coolant for the John Deere 9320T tractor is John Deere Cool-Gard II
Coolant type note
Coolant type matters on the John Deere 9320T. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere 9320T, the antifreeze mix is listed as The recommended coolant for the John Deere 9320T tractor is John Deere Cool-Gard II. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 16 gal (60.6 L) capacity to buy enough coolant for the John Deere 9320T, but finish the job by checking the actual level marks
Engine context
The engine context for the John Deere 9320T is engine horsepower 375 hp and engine displacement 765 cu in (12.54 L). Use this for comparison only; the refill amount is the coolant capacity above
John Deere 9320T Coolant Capacity FAQ
How many litres of coolant does the John Deere 9320T take?
Use 16 gal (60.6 L) as the coolant-change amount for the John Deere 9320T. The final level should still be checked at the radiator or overflow bottle
What coolant chemistry should the John Deere 9320T use?
Use coolant compatible with John Deere Cool-Gard II for the John Deere 9320T. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere 9320T?
The John Deere 9320T coolant mix guidance is The recommended coolant for the John Deere 9320T tractor is John Deere Cool-Gard II. Keep the mix consistent when topping up so freeze and boil protection stay in range
How do I avoid air pockets when refilling the John Deere 9320T coolant?
The 16 gal (60.6 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
Should old coolant be drained from the John Deere 9320T?
For the John Deere 9320T, use the 16 gal (60.6 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
