The John Deere 8370RT is 118 in tall, with a 120.1 in wheelbase.
Height118 in (9 ft 10 in) / 2,997.2 mm
Wheelbase120.1 in (10 ft 0.1 in) / 3,050.5 mm
Ground clearance23.1 in (1 ft 11.1 in) / 586.7 mm
John Deere 8370RT Dimensions
Overall height
118 in (9 ft 10 in) / 2,997.2 mm
Wheelbase
120.1 in (10 ft 0.1 in) / 3,050.5 mm
Ground clearance
23.1 in (1 ft 11.1 in) / 586.7 mm
Tractor Size Comparison Chart
Overall height comparison
This model
118 in
Average
86.2 in
Low
39.8 in
High
152 in
Wheelbase comparison
This model
120.1 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
23.1 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 8370RT Extra Dimension Notes
Storage fit note
The John Deere 8370RT is a shed-bay tractor rather than a garage tractor. With height 118 in (9 ft 10 in) / 2,997.2 mm, leave margin for height and width.
Fitment note
The John Deere 8370RT dimension row shows height at 118 in (9 ft 10 in) / 2,997.2 mm. Treat those as the headline measurements for storage, transport and property access.
Wheelbase note
Wheelbase is listed at 120.1 in (10 ft 0.1 in) / 3,050.5 mm for the John Deere 8370RT. That is one of the main chassis-size measurements.
Ground clearance note
The John Deere 8370RT lists 23.1 in (1 ft 11.1 in) / 586.7 mm of ground clearance. That is useful for uneven ground and general underbody clearance.
Storage Tips
Leave room around the John Deere 8370RT for mirrors, steps, tires, cab/ROPS and attachments.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 120.1 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears 118 in height, width not captured width and length not captured length with margin. Around 14 ft high is the no-drama check.
What size door should I check?
Start with the hard numbers: 118 in high, width not captured wide and length not captured long. Then step up to a practical storage target of about 14 ft high.
Do attachments change the storage size?
Yes. If the bay only clears the listed length not captured length, it is too short once attachments stay on. Use about the tractor length plus attachment room bare, then add attachment length.
How much maneuvering room should I allow?
The length not captured length needs bay depth, but the 120.1 in wheelbase needs lineup room. Treat about 23 ft outside the shed as the practical approach zone.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
