John Deere 8370RT Coolant Capacity

Quick answer:

The John Deere 8370RT takes 10.6 gal (40.1 L) of coolant, with capacity The John Deere 8370RT tractor has a coolant capacity of 13 listed as the coolant type.

Coolant capacity10.6 gal (40.1 L)Cooling system refill amount
Coolant typecapacity The John Deere 8370RT tractor has a coolant capacity of 13Match coolant chemistry

John Deere 8370RT Coolant Capacity Specs

Coolant capacity 10.6 gal (40.1 L)
Coolant type capacity The John Deere 8370RT tractor has a coolant capacity of 13
Engine horsepower 370 hp
Engine displacement 548 cu in (9 L)

John Deere 8370RT Coolant Capacity Guide

Coolant capacity guide

This model

10.6 gal

Class low

10 gal

Class typical

16 gal

Class high

24 gal

Compared with a broad 8 series guide, not the full tractor dataset.

John Deere 8370RT Coolant Service Notes

Coolant capacity note The John Deere 8370RT cooling system is listed at 10.6 gal (40.1 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note For a full coolant service on the John Deere 8370RT, plan around 10.6 gal (40.1 L) and match the listed coolant guidance: capacity The John Deere 8370RT tractor has a coolant capacity of 13
Coolant type note The John Deere 8370RT coolant type is capacity The John Deere 8370RT tractor has a coolant capacity of 13. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Refill check After a drain and refill on the John Deere 8370RT, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context The John Deere 8370RT engine specs listed with this page are engine horsepower 370 hp and engine displacement 548 cu in (9 L). They help identify the machine, but they are not a substitute for the coolant capacity

John Deere 8370RT Coolant Capacity FAQ

How much coolant does the John Deere 8370RT take?

The cooling system capacity for the John Deere 8370RT is 10.6 gal (40.1 L). This is the main refill figure for a drain, flush or coolant change

Does the John Deere 8370RT use John Deere Cool-Gard coolant?

For the John Deere 8370RT, the coolant type is listed as capacity The John Deere 8370RT tractor has a coolant capacity of 13. Avoid mixing incompatible coolant products

Do I need to recheck coolant level after servicing the John Deere 8370RT?

Fill the John Deere 8370RT slowly, run it with the heater/thermostat cycle where applicable, let it cool and check the level again. That helps catch trapped air

When should contaminated coolant be replaced in the John Deere 8370RT?

Flush the John Deere 8370RT cooling system if the coolant is dirty, contaminated, badly diluted or overdue for service. A simple top-up does not fix old coolant chemistry

Can I mix coolant types when topping up the John Deere 8370RT?

Match coolant by specification, not just color. For the John Deere 8370RT, the listed coolant guidance is capacity The John Deere 8370RT tractor has a coolant capacity of 13. If compatibility is unclear, flush and refill rather than mixing types

Official information note

Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.