The John Deere 7R 230 is 80.5 in wide and 116.5 in tall, with a 115.2 in wheelbase.
John Deere 7R 230 Dimensions
| Overall width | 80.5 in (6 ft 8.5 in) / 2,044.7 mm |
|---|---|
| Overall height | 116.5 in (9 ft 8.5 in) / 2,959.1 mm |
| Wheelbase | 115.2 in (9 ft 7.2 in) / 2,926.1 mm |
| Ground clearance | 19.5 in (1 ft 7.5 in) / 495.3 mm |
Tractor Size Comparison Chart
Overall width comparison
Overall height comparison
Wheelbase comparison
Ground clearance comparison
John Deere 7R 230 Extra Dimension Notes
| Storage fit note | For storage, the John Deere 7R 230 should be treated as machinery-shed size. With width 80.5 in (6 ft 8.5 in) / 2,044.7 mm and height 116.5 in (9 ft 8.5 in) / 2,959.1 mm, normal residential garage clearance is not a safe assumption. |
|---|---|
| Wheelbase note | The captured wheelbase for the John Deere 7R 230 is 115.2 in (9 ft 7.2 in) / 2,926.1 mm. It is useful for judging stability and transport length together. |
| Ground clearance note | The John Deere 7R 230 has ground clearance of 19.5 in (1 ft 7.5 in) / 495.3 mm. That is the key underbody number in this table. |
Storage Tips
- Treat the John Deere 7R 230 as a machinery-shed tractor, not a normal garage tractor.
- Recommended storage clearance: target about 168 in (14 ft) clear height; target about 144 in (12 ft) clear width.
- Big tractors need service room around them, not just enough space to squeeze inside.
- A 115.2 in wheelbase means the approach into the storage bay matters, not just the doorway width.
- A 10 ft or 12 ft class doorway may be needed depending on the exact cab/ROPS setup.
Storage FAQ
Will it fit in a garage?
Because the John Deere 7R 230 is 116.5 in tall and 80.5 in wide, door track height and side posts matter. Because it is length not captured long, the bay also needs about the tractor length plus attachment room of usable depth.
What size door should I check?
The clean check is 14 ft high, 12 ft wide and the tractor length plus attachment room deep. That gives margin over the listed 116.5 in height, 80.5 in width and length not captured length.
Do attachments change the storage size?
Yes. Treat length not captured as the bare length only. If front or rear gear stays fitted, add roughly 8 ft to 15 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 115.2 in wheelbase and 80.5 in width, tight offset entries are where damage happens.
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.







