The John Deere 6330 tractor hydraulic pump flow is 42 GPM, and hydraulic system pressure is 2,000 psi.
Hydraulic pump flow42 GPM
Implement flow29 GPM
Total hydraulic flow32 GPM
Hydraulic pressure2,000 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity54.8 qt (13.7 gal)
John Deere 6330 Hydraulic Flow Details
Hydraulic pump flow
42 GPM
Implement hydraulic flow
29 GPM
Total hydraulic flow
32 GPM
Hydraulic system pressure
2,000 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
54.8 qt (13.7 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
42 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
29 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
32 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,000 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
13.7 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 6330 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 6330 separates implement flow from total hydraulic flow: 29 GPM is the more useful number for rear remotes and hydraulic implements, while 32 GPM includes the wider system total.
Hydraulic pressure note
At 2,000 psi, the John Deere 6330’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (29 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6330 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 6330 is 54.8 qt (13.7 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
