The John Deere 6210 tractor hydraulic pump flow is 14.3 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow14.3 GPM
Implement flow31.1 GPM
Total hydraulic flow31.1 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity94 qt (23.5 gal)
John Deere 6210 Hydraulic Flow Details
Hydraulic pump flow
14.3 GPM
Implement hydraulic flow
31.1 GPM
Total hydraulic flow
31.1 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
94 qt (23.5 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
14.3 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
31.1 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
31.1 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
23.5 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 6210 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 6210 is 31.1 GPM implement flow; that points toward multiple SCVs, larger implements and heavier hydraulic demand.
Hydraulic pressure note
Hydraulic pressure on the John Deere 6210 is 2,900 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (31.1 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 6210: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
The John Deere 6210’s hydraulic fluid capacity is listed as 94 qt (23.5 gal); check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
