The John Deere 6135E tractor hydraulic pump flow is 30 GPM, and hydraulic system pressure is 790 psi.
Hydraulic pump flow30 GPM
Implement flow20 GPM
Total hydraulic flow20 GPM
Hydraulic pressure790 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity20 gal
John Deere 6135E Hydraulic Flow Details
Hydraulic pump flow
30 GPM
Implement hydraulic flow
20 GPM
Total hydraulic flow
20 GPM
Hydraulic system pressure
790 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
20 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
30 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
20 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
20 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
790 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
20 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 6135E Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 6135E is 20 GPM implement flow; that points toward larger loaders, rear remotes and more demanding implements, depending on pressure and valve setup.
Hydraulic pressure note
Hydraulic pressure on the John Deere 6135E is 790 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (20 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6135E’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 6135E is 20 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
