The John Deere 5104 is 132 in long, 72 in wide, and 96 in tall.
Length132 in (11 ft 0 in) / 3,352.8 mm
Width72 in (6 ft 0 in) / 1,828.8 mm
Height96 in (8 ft 0 in) / 2,438.4 mm
John Deere 5104 Dimensions
Overall length
132 in (11 ft 0 in) / 3,352.8 mm
Overall width
72 in (6 ft 0 in) / 1,828.8 mm
Overall height
96 in (8 ft 0 in) / 2,438.4 mm
Tractor Size Comparison Chart
Overall length comparison
This model
132 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
72 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
96 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 5104 Extra Dimension Notes
Storage fit note
The John Deere 5104 can fit smaller farm storage setups if the opening is right. With length 132 in (11 ft 0 in) / 3,352.8 mm, width 72 in (6 ft 0 in) / 1,828.8 mm, and height 96 in (8 ft 0 in) / 2,438.4 mm, do not ignore cab/ROPS height.
Fitment note
The John Deere 5104 fitment specs show length at 132 in (11 ft 0 in) / 3,352.8 mm, width at 72 in (6 ft 0 in) / 1,828.8 mm, and height at 96 in (8 ft 0 in) / 2,438.4 mm. That is the practical buyer information for size.
Storage Tips
Use a tall garage, barn bay or small machinery shed as the first storage check for the John Deere 5104.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Storage FAQ
Will it fit in a garage?
At 132 in long, 72 in wide, and 96 in tall, a tall garage or small shed is the realistic starting point. Use about 9 ft high, 8 ft wide, and 15 ft deep before counting attachments.
What size door should I check?
For this compact tractor, check the narrowest real opening. A doorway close to 72 in wide or 96 in tall is not enough; aim for roughly 9 ft high, 8 ft wide, 15 ft deep.
Do attachments change the storage size?
Yes. A loader mainly adds depth and sometimes height; a rear implement adds depth; a mower deck or tire setting can add width beyond the listed 72 in.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 132 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
