The John Deere 5101E is 147.6 in long, 64.6 in wide, and 98.8 in tall, with a 85.8 in wheelbase.
Length147.6 in (12 ft 3.6 in) / 3,749 mm
Width64.6 in (5 ft 4.6 in) / 1,640.8 mm
Height98.8 in (8 ft 2.8 in) / 2,509.5 mm
Wheelbase85.8 in (7 ft 1.8 in) / 2,179.3 mm
Ground clearance16.5 in (1 ft 4.5 in) / 419.1 mm
John Deere 5101E Dimensions
Overall length
147.6 in (12 ft 3.6 in) / 3,749 mm
Overall width
64.6 in (5 ft 4.6 in) / 1,640.8 mm
Overall height
98.8 in (8 ft 2.8 in) / 2,509.5 mm
Wheelbase
85.8 in (7 ft 1.8 in) / 2,179.3 mm
Ground clearance
16.5 in (1 ft 4.5 in) / 419.1 mm
Tractor Size Comparison Chart
Overall length comparison
This model
147.6 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
64.6 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
98.8 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
85.8 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
16.5 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 5101E Extra Dimension Notes
Size class note
The John Deere 5101E size story is simple: it is a utility tractor. It is better suited to farm work, loader jobs, hay, livestock properties and machinery-shed storage than tight residential spaces.
Wheelbase note
The captured wheelbase for the John Deere 5101E is 85.8 in (7 ft 1.8 in) / 2,179.3 mm. It is useful for judging stability and transport length together.
Ground clearance note
The John Deere 5101E has ground clearance of 16.5 in (1 ft 4.5 in) / 419.1 mm. That is the key underbody number in this table.
Storage Tips
The John Deere 5101E is not tiny, so doorway height and approach angle matter more than floor area alone.
Measure the lowest overhead point, not the tallest part of the shed roof.
This class can feel compact in the paddock but large at the shed doorway.
A 85.8 in wheelbase means the approach into the storage bay matters, not just the doorway width.
Storage FAQ
Will it fit in a garage?
If the tractor is stored bare, compare your garage to 147.6 in long, 64.6 in wide and 98.8 in tall. If you want normal parking room, use around 10 ft high, 8 ft wide, and 18 ft deep instead.
What size door should I check?
The clean check is 10 ft high, 8 ft wide and 18 ft deep. That gives margin over the listed 98.8 in height, 64.6 in width and 147.6 in length.
Do attachments change the storage size?
Yes. Measure the tractor in storage trim: highest point compared with 98.8 in, widest point compared with 64.6 in, and longest parked length compared with 147.6 in.
How much maneuvering room should I allow?
If you cannot approach straight, go wider than 8 ft. With 64.6 in tractor width and a 85.8 in wheelbase, angled entries need extra side margin.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
