The John Deere 4010 tractor hydraulic pump flow is 13 GPM, and hydraulic system pressure is 2,250 psi.
Hydraulic pump flow13 GPM
Implement flow18 GPM
Total hydraulic flow18 GPM
Hydraulic pressure2,250 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity2.6 gal
John Deere 4010 Hydraulic Flow Details
Hydraulic pump flow
13 GPM
Implement hydraulic flow
18 GPM
Total hydraulic flow
18 GPM
Hydraulic system pressure
2,250 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
2.6 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
13 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
18 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
18 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,250 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
2.6 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 4010 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 4010 is 18 GPM implement flow; that points toward larger loaders, rear remotes and more demanding implements, depending on pressure and valve setup.
Hydraulic pressure note
At 2,250 psi, the John Deere 4010’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (18 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 4010: closed-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
For maintenance, the John Deere 4010’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
