John Deere 4010 Fuel Tank Capacity

John Deere 4010 Fuel Tank Capacity

Quick answer

The John Deere 4010 fuel tank capacity is 3.4 gal (12.9 L). It is listed with diesel fuel, a half-tank amount of 1.7 gal (6.4 L), and 1 x 5-gal can.

Fuel tank capacity3.4 gal (12.9 L)Empty-to-full tank amount
Half tank1.7 gal (6.4 L)Planning guide
5-gal cans1 x 5-gal can is enough from emptyPortable fuel estimate
Fuel typedieselUse correct fuel

John Deere 4010 fuel tank capacity specs

Fuel tank capacity 3.4 gal (12.9 L)
Fuel capacity in litres 12.9 L
Half tank amount 1.7 gal (6.4 L)
5-gallon fuel cans 1 x 5-gal can is enough from empty
10-litre fuel jugs 2 x 10-L jugs
Fuel type diesel
Estimated full tank fuel weight 24 lb (11 kg) of diesel
Fuel capacity is a tank-size figure. Actual top-up amount and runtime depend on remaining fuel, workload, throttle use, terrain and machine condition.

John Deere 4010 fuel planning notes

Fuel capacity note The main fuel number for the John Deere 4010 is 3.4 gal (12.9 L). Use it as the empty-to-full tank amount, not as a guaranteed runtime figure.
Refill planning The John Deere 4010 is easiest to plan by container count: 1 x 5-gal can or 2 x 10-L jugs. Do not overfill past the filler-neck guidance.
Fuel type note The listed fuel type for the John Deere 4010 is diesel. Match the fuel type before filling; do not assume every John Deere machine uses diesel.
Full tank weight The John Deere 4010 tank capacity equals roughly 24 lb (11 kg) of diesel when full. This helps when thinking about transport weight and fuel handling.

Fuel tank capacity guide

This model

3.4 gal

Guide low

1 gal

Guide typical

2.5 gal

Guide high

5.5 gal

Compared with a broad small fuel tank guide, selected from the listed tank size.

John Deere 4010 fuel capacity FAQ

What is the John Deere 4010 fuel capacity?

The empty-to-full fuel amount for the John Deere 4010 is 3.4 gal (12.9 L). If the gauge is not on empty, it will take less.

What is the litre conversion for the John Deere 4010 fuel tank?

In litres, the John Deere 4010 fuel capacity is about 12.9 L based on the listed 3.4 gal (12.9 L) tank size.

How many gallons is half a tank on the John Deere 4010?

The John Deere 4010 half-tank amount is 1.7 gal (6.4 L). If the machine is on a slope, the gauge may read differently.

How many 5-gallon cans fill the John Deere 4010?

To fill the John Deere 4010 from empty, budget 1 x 5-gal can or 2 x 10-L jugs. If it is only low rather than empty, reduce that amount.

What fuel type does the John Deere 4010 use?

Use diesel in the John Deere 4010 where that listing applies. Wrong fuel can create a much bigger problem than a low tank.

How many hours will the John Deere 4010 run on 3.4 gal (12.9 L)?

Runtime depends on loader work, mowing, PTO implements, slopes, travel speed, throttle and engine condition. The 3.4 gal (12.9 L) tank gives the storage amount, not a fixed hour rating.

What does the John Deere 4010 tank size mean for refueling?

With a listed capacity of 3.4 gal (12.9 L), the John Deere 4010 is best planned as a small tank for fuel handling.

Official information note

Mistakes do happen. Check the operator manual, service manual and official deere.com website for official fuel capacity specifications.