The John Deere 332 mower blade part number found is M144202. The blade set part numbers found are AM132476 and M86209. The blade measurement captured is width 2.5 in (64 mm) and thickness 0.203 in (5 mm).
John Deere 332 Mower Blade Size and Part Numbers
| Mower blade part number | M144202 |
|---|---|
| Mower blade set part number | AM132476 and M86209 |
| Blade width | 2.5 in (64 mm) |
| Blade thickness | 0.203 in (5 mm) |
| Blade type | high-lift, mulching, and bagging |
Blade Size Comparison Chart
Blade width comparison
Blade thickness comparison
John Deere 332 Blade Notes
| Blade note | The John Deere 332 blade listing captured here shows single blade part number M144202, blade set part numbers AM132476 and M86209, and width 2.5 in (64 mm) and thickness 0.203 in (5 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Blade type note | The blade type captured for the John Deere 332 is high-lift, mulching, and bagging. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | For the John Deere 332, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering |
John Deere 332 Mower Blade FAQ
Should you buy John Deere 332 blades by length only?
No. The blade width found is 2.5 in (64 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. Use length, width, center hole and OEM part number together where possible
Should you buy one John Deere 332 blade or a full set?
The single blade number captured is M144202, and the set number captured is AM132476 and M86209. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Which blade type should you use on the John Deere 332?
The blade type captured is high-lift, mulching, and bagging. Use that against the captured fitment value M144202. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
