The John Deere 3025E is 62 in wide, with a 60 in wheelbase.
Width62 in (5 ft 2 in) / 1,574.8 mm
Wheelbase60 in (5 ft 0 in) / 1,524 mm
Ground clearance14 in (1 ft 2 in) / 355.6 mm
John Deere 3025E Dimensions
Overall width
62 in (5 ft 2 in) / 1,574.8 mm
Wheelbase
60 in (5 ft 0 in) / 1,524 mm
Ground clearance
14 in (1 ft 2 in) / 355.6 mm
Rear tread width
62 in (5 ft 2 in) / 1,574.8 mm
Tractor Size Comparison Chart
Overall width comparison
This model
62 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
60 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
14 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 3025E Extra Dimension Notes
Fitment note
The John Deere 3025E gives width at 62 in (5 ft 2 in) / 1,574.8 mm. Use those numbers for the shed, trailer and access check.
Wheelbase note
For size comparison, the John Deere 3025E’s 60 in (5 ft 0 in) / 1,524 mm wheelbase is a strong reference point.
Ground clearance note
The John Deere 3025E has captured ground clearance of 14 in (1 ft 2 in) / 355.6 mm. More clearance helps in ruts and uneven ground; less clearance can feel more planted.
Tread width note
The captured tread data for the John Deere 3025E gives rear tread only: 62 in (5 ft 2 in) / 1,574.8 mm.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
Use the bare dimensions only as a starting point; a practical storage target is 10 ft wide.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 60 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
If your garage door is close to height not captured tall or 62 in wide, count it as too tight. The safer check for the John Deere 3025E is around 10 ft wide.
What size door should I check?
Use 10 ft wide as the door-and-bay target. That is based on the tractor’s height not captured height, 62 in width and length not captured length, plus working clearance.
Do attachments change the storage size?
Yes. Keep the bare dimensions in mind: length not captured long, 62 in wide and height not captured tall. Then add attachment overhang, folded ROPS/cab height and mower or tire width.
How much maneuvering room should I allow?
A short answer: give the tractor enough room to approach straight, not just enough room to fit inside. With 60 in wheelbase, about 12 ft outside the opening is a better check.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
