The John Deere 2010C tractor hydraulic pump flow is 28.5 GPM, and hydraulic system pressure is 1,150 psi.
Hydraulic pump flow28.5 GPM
Implement flow8 GPM
Total hydraulic flow35 GPM
Hydraulic pressure1,150 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity10.3 gal
John Deere 2010C Hydraulic Flow Details
Hydraulic pump flow
28.5 GPM
Implement hydraulic flow
8 GPM
Total hydraulic flow
35 GPM
Hydraulic system pressure
1,150 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
10.3 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
28.5 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
8 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
35 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
1,150 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
10.3 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 2010C Extra Hydraulic Notes
Hydraulic flow note
For attachments, the John Deere 2010C’s implement hydraulic flow matters more than total flow. The listed gap is about 27 GPM between implement flow and total flow.
Hydraulic pressure note
At 1,150 psi, the John Deere 2010C’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (8 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 2010C: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 2010C is 10.3 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
