Weight summary
The published John Deere 2010C weight is 8,387–9,645 lb (3,804–4,374 kg). The primary figure used for comparisons is 9,550 lb (4,331 kg), listed as Operating — gas, no blade. The published configurations span 1,258 lb, a 15% difference from the lightest listed setup.
How this weight compares
All tractors in this dataset · 2,282 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | John Deere |
|---|---|
| Model | 2010C |
| Category | Farm tractor |
| Model years | 1960 – 1965 |
| Tractor type | Farm tractor |
| Published weight variants | 4 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Shipping | gas | 8,387 lb | 3,804 kg | 4.19 | — |
| Shipping | diesel | 8,492 lb | 3,851 kg | 4.25 | — |
| Operating | gas, no blade | 9,550 lb | 4,331 kg | 4.78 | — |
| Operating | diesel, no blade | 9,645 lb | 4,374 kg | 4.82 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Allis Chalmers 7000 (9550 lb)
- Kubota M8950 (9555 lb)
- Kubota M115G (9568 lb)
- Case IH 1694 (9580 lb)
- International Harvester Mogul 12-25 (9580 lb)
Closest comparable tractors
- International Harvester 856 (10290 lb)
- John Deere 3141 (8800 lb)
- John Deere 3641 (8800 lb)
- Ford 5110 Mark III (8466 lb)
- International Harvester TD-9 (10800 lb, 49.5 hp)
John Deere 2010C weight FAQ
How much does a John Deere 2010C weigh?
The John Deere 2010C weighs 9,550 lb (4,331 kg) using the published Operating — gas, no blade figure. Across the published configurations on this page, weight ranges from 8,387 to 9,645 lb (3,804 to 4,374 kg).
What is the operating weight of the John Deere 2010C compared with shipping weight?
Published operating weight is 9,550–9,645 lb (4,332–4,375 kg), versus 8,387–8,492 lb (3,804–3,852 kg) for shipping weight. That is roughly 1,163 lb (13.9%) more than shipping weight. Operating weight is generally the more useful starting point when estimating a ready-to-use tractor.
Is the John Deere 2010C heavy or light for a farm tractor?
It is close to average for its peer group. The representative figure sits at about the 68th percentile, near the middle of the all tractors in this dataset. That puts it in the average range for this comparison. It is 377 lb lighter than the peer-group average of 9,927 lb.
How wide is the John Deere 2010C for transport?
The maximum published tractor width is 61.2 in (5.1 ft). That is 40.8 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the John Deere 2010C weight-to-horsepower ratio?
Using the page’s representative 9,550 lb weight and 47.5 hp power figure, the tractor carries about 201.3 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the John Deere 2010C weigh?
The representative published weight is about 4.78 US tons, while the full published range is 4.19–4.82 US tons. Loaded transport weight can be higher than the tractor specification.
