The John Deere 1035 tractor hydraulic pump flow is 3.5 GPM, and hydraulic system pressure is 1,000 psi.
Hydraulic pump flow3.5 GPM
Implement flow11.9 GPM
Total hydraulic flow11.9 GPM
Hydraulic pressure1,000 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity6 gal
John Deere 1035 Hydraulic Flow Details
Hydraulic pump flow
3.5 GPM
Implement hydraulic flow
11.9 GPM
Total hydraulic flow
11.9 GPM
Hydraulic system pressure
1,000 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
6 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
3.5 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
11.9 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
11.9 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
1,000 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
6 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 1035 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 1035 should be matched to implements that fit its 11.9 GPM hydraulic-flow range.
Hydraulic pressure note
The John Deere 1035’s hydraulic pressure is listed at 1,000 psi, which is lower-pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (11.9 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 1035 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 1035 is 6 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
