The Cub Cadet 149 mower blade part number found is 942-05052. The blade measurement captured is thickness 0.188 in (5 mm).
Blade part #942-05052
Blade sizethickness 0.188 in (5 mm)
Cub Cadet 149 Mower Blade Size and Part Numbers
Mower blade part number
942-05052
Blade thickness
0.188 in (5 mm)
Blade type
high-lift, mulching, standard, bagging, and Gator
Blade Size Comparison Chart
Blade thickness comparison
This model
0.188 in
Average
0.188 in
Low
0.125 in
High
0.25 in
Cub Cadet 149 Blade Notes
Blade note
The Cub Cadet 149 blade listing captured here shows single blade part number 942-05052 and thickness 0.188 in (5 mm). Use this as a buying guide, then match the blade position, deck size and center-hole style before spending money
Blade type note
The Cub Cadet 149 blade style captured here is high-lift, mulching, standard, bagging, and Gator. Blade type affects airflow and clipping handling, not just cut width
Fitment note
Blades are cheap until you buy the wrong set twice. On the Cub Cadet 149, confirm part number, deck size and blade count before buying
Cub Cadet 149 Mower Blade FAQ
Can you swap Cub Cadet 149 blade types?
The blade type captured is high-lift, mulching, standard, bagging, and Gator. You can often choose a different style only if it fits the same deck and spindle setup. Use 942-05052 as the fitment starting point
Is the captured Cub Cadet 149 blade part number enough to buy from?
The captured blade part number is 942-05052. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official cubcadet.com before ordering replacement blades.
