The Kubota Z724X mower blade part number found is 77700-00465. The blade measurement captured is length 24.5 in (622 mm), width 2.5 in (64 mm), and thickness 0.25 in (6 mm). The deck uses 3 blades. The captured deck size is 48 in deck.
Blade part #77700-00465
Blade sizelength 24.5 in (622 mm), width 2.5 in (64 mm), and thickness 0.25 in (6 mm)
Blade count3 blades
Deck size48 in deck
Kubota Z724X Mower Blade Size and Part Numbers
Mower blade part number
77700-00465
Blade length
24.5 in (622 mm)
Blade width
2.5 in (64 mm)
Blade thickness
0.25 in (6 mm)
Number of blades
3 blades
Deck size
48 in deck
Blade type
high-lift, mulching, and bagging
Blade Size Comparison Chart
Blade length comparison
This model
24.5 in
Average
22 in
Low
18 in
High
28 in
Blade width comparison
This model
2.5 in
Average
2.5 in
Low
2 in
High
3.5 in
Blade thickness comparison
This model
0.25 in
Average
0.25 in
Low
0.188 in
High
0.312 in
Mower deck size comparison
This model
48 in
Average
48 in
Low
38 in
High
60 in
Kubota Z724X Blade Notes
Blade note
The Kubota Z724X blade listing captured here shows single blade part number 77700-00465 and length 24.5 in (622 mm), width 2.5 in (64 mm), and thickness 0.25 in (6 mm). Do not buy purely from model name if the mower deck or serial range is different
Deck note
For the Kubota Z724X, the captured deck information is deck size 48 in deck and blade count 3 blades. Deck size matters because the same model family can use different blade kits
Blade type note
For the Kubota Z724X, blade type is listed as high-lift, mulching, and bagging. Pick the blade style for the job: clean discharge, bagging lift, or mulching
Fitment note
Blades are cheap until you buy the wrong set twice. On the Kubota Z724X, confirm part number, deck size and blade count before buying
Kubota Z724X Mower Blade FAQ
What should you check when fitting a 24.5 in (622 mm) blade on the Kubota Z724X?
A 24.5 in (622 mm) blade needs the right center hole, lift style and deck clearance. That is a longer mower blade, so wrong lift or wrong center hole can cause vibration, poor discharge or deck contact. Spin the blade by hand after fitting to confirm it clears the deck
Does 2.5 in (64 mm) blade width matter on the Kubota Z724X?
Yes. The blade width captured is 2.5 in (64 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. A different width can change airflow, cut quality and clipping discharge
How do you avoid buying the wrong Kubota Z724X blade kit?
Start with the captured deck setup: 48 in deck and 3 blades. Then confirm the blade part number against the deck tag, old blade stamp or parts diagram
Can you swap Kubota Z724X blade types?
The blade type captured is high-lift, mulching, and bagging. You can often choose a different style only if it fits the same deck and spindle setup. Use 48 in deck as the fitment starting point
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
