The Case IH Farmall DX24 tractor battery spec found is 12 V, Group 24, with 600 CCA.
Voltage12 V
Group size24
Cold cranking amps600 CCA
Case IH Farmall DX24 Battery Size Details
Replacement battery recommendation
12 V – Group 24, 600 CCA
Battery voltage
12 V
Battery group size
24
Battery CCA
600 CCA
Battery CCA Comparison Chart
Battery CCA comparison
This model
600 CCA
Average
600 CCA
Low
400 CCA
High
800 CCA
Benchmarks use practical low, average and high cold-cranking-amp ranges for the compact tractor category. Use the exact battery label and manual before buying.
Case IH Farmall DX24 Extra Battery Notes
Replacement note
For the Case IH Farmall DX24, match the replacement battery to the captured spec: 12 V, Group 24, 600 CCA. Physical fit, terminal layout and hold-down fit still matter
Battery location
The battery on the Case IH Farmall DX24 tractor is a 12‑volt unit located in the electrical system, as part of the standard 12‑volt electrical setup
Bad battery symptoms
Case IH Farmall DX24 tractor battery issues often show as hard starting or no response when turning the key, a clicking sound from the starter, rapid battery drain or inability to hold a charge below about 11.5 volts, and visible corrosion on battery terminals or connections
Safe removal note
Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame
Official information note
Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official caseih.com website before ordering a replacement battery.
