The Case IH Farmall 130A tractor weighs 9,660 lb (4,381 kg) using its published 2WD ROPS weight. Other useful published figures are 12,700 lb (Ballasted) and 10,225 lb (4WD ROPS). That places it around the 90th percentile among comparable utility tractors, heavier than about 90% of its peers.
The published Case IH Farmall 130A weight is 9,660–12,700 lb (4,381–5,760 kg). The primary figure used for comparisons is 9,660 lb (4,381 kg), listed as 2WD ROPS. The published configurations span 3,040 lb, a 31.5% difference from the lightest listed setup.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Very heavy
9,660 lb
Low1,537 lb
This model9,660 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight9,660–12,700 lb (4,381–5,760 kg)
Overall weight bandHeavy
Tractor typeUtility Tractor
Primary horsepower130 hp / 96.9 kW
Max width74.5 in (189.2 cm)
Max height117.3 in (297 cm)
Overview
Model information
Manufacturer
Case IH
Model
Farmall 130A
Category
Farm tractor
Model years
2015 –
Tractor type
Utility Tractor
Published weight variants
5
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
2WD ROPS
—
9,660 lb
4,381 kg
4.83
—
4WD ROPS
—
10,225 lb
4,638 kg
5.11
—
2WD Cab
—
10,040 lb
4,554 kg
5.02
—
4WD Cab
—
10,605 lb
4,810 kg
5.3
—
Ballasted
—
12,700 lb
5,760 kg
6.35
—
Configuration effect
How configuration changes the weight
3,040 lbLightest to heaviest · 31.5% spread across published variants
+3,040 lbBase to ballasted · 31.5% increase
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase104 in (264 cm)
Width74.5 in (189.2 cm)
Height117.3 in (297 cm)
Power & weight ratios
Primary power130 hp (96.9 kW)
Power basisEngine
Weight per horsepower74.3 lb/hp
Transport snapshot
Primary published weight9,660 lb (4,381 kg)
Maximum published weight12,700 lb (5,760 kg)
Maximum US-ton equivalent6.35 US tons
Maximum published width74.5 in (189.2 cm)
Published width over 102 inNo
Weight context
Weight range9,660–12,700 lb (4,381–5,760 kg)
Primary weight basis2WD ROPS
Peer positionVery heavy among Utility Tractor peers · 90th percentile
Physical size classNot enough dimension data
For transport planning, the representative published tractor weight is about 9,660 lb (4.83 US tons); published configurations reach 12,700 lb (6.35 US tons); the widest published tractor dimension is 74.5 in (6.2 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
John Deere 6110 (9645 lb)
John Deere 6125J (9678 lb)
Kubota M130X (9678 lb)
John Deere 6410 (9680 lb)
Kubota M125X (9680 lb)
Closest comparable tractors
Kubota M130X (9678 lb, 130 hp)
Kubota M135A (9744 lb, 133.2 hp)
John Deere 6125J (9678 lb, 125 hp)
Massey Ferguson 5M.135 (9921 lb, 130 hp)
John Deere 6130D (9920 lb, 129.8 hp)
Common questions
Case IH Farmall 130A weight FAQ
How much does a Case IH Farmall 130A weigh?
The Case IH Farmall 130A weighs 9,660 lb (4,381 kg) using the published 2WD ROPS figure. Across the published configurations on this page, weight ranges from 9,660 to 12,700 lb (4,381 to 5,760 kg).
How much heavier is the 4WD Case IH Farmall 130A than the 2WD model?
Published 2WD weight is 9,660–10,040 lb (4,382–4,554 kg), while published 4WD weight is 10,225–10,605 lb (4,638–4,810 kg). On a midpoint basis, the published 4WD configurations are about 565 lb heavier. Tires, transmission and other configuration differences can also affect the number.
How much does the Case IH Farmall 130A weigh with ballast?
The published ballasted weight is 12,700 lb (5,761 kg). That is up to 3,040 lb (31.5%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the Case IH Farmall 130A a heavy utility tractor?
Yes. The representative figure sits at about the 90th percentile, heavier than roughly 90% of the utility tractor peers. That puts it in the very heavy range for this comparison. It is 4,397 lb heavier than the peer-group average of 5,263 lb.
How wide is the Case IH Farmall 130A for transport?
The maximum published tractor width is 74.5 in (6.2 ft). That is 27.5 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
Does the Case IH Farmall 130A weigh more than 10,000 lb?
Some configurations do. The representative published weight is 9,660 lb, and the heaviest published configuration on this page is 12,700 lb (6.35 US tons). Any trailer calculation also needs the trailer itself plus fuel, ballast, attachments and other equipment.
