Case IH 4994 Dimensions, Length, Width & Height

Quick answer:

The Case IH 4994 dimensions found are: length is 261.8 inches | 664 cm, width is 117 inches (minimum) | 297 cm, height is 138.5 inches | 351 cm, and wheelbase is 124.8 inches | 316 cm.

Length261.8 inches | 664 cm
Width117 inches (minimum) | 297 cm
Height138.5 inches | 351 cm
Wheelbase124.8 inches | 316 cm

Case IH 4994 Dimensions

Overall length 261.8 inches | 664 cm
Overall width 117 inches (minimum) | 297 cm
Overall height Exhaust: 138.5 inches | 351 cm
Wheelbase 124.8 inches | 316 cm

Case IH 4994 Weight

Shipping weight 26,500 lbs | 12020 kg
Operating weight 31,315 lbs | 14204 kg
Ballasted weight 39,930 lbs | 18112 kg
Maximum capacity weight 40,000 lbs | 18144 kg

Case IH 4994 Tire Size Notes

Ag front 24.5-32 | 20.8-38
Ag rear 24.5-32 | 20.8-38

Case IH 4994 Dimension Comparison Charts

Length comparison

This model

261.8 in

Average

190 in

Low

155 in

High

240 in

Width comparison

This model

117 in

Average

96 in

Low

78 in

High

120 in

Height comparison

This model

138.5 in

Average

125 in

Low

105 in

High

150 in

Wheelbase comparison

This model

124.8 in

Average

115 in

Low

95 in

High

145 in

Floor space footprint

This model

213 sq ft

Average

130 sq ft

Low

90 sq ft

High

200 sq ft

Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.

Case IH 4994 Extra Dimension Notes

Storage and fit note Using the first listed dimension values, the Case IH 4994 is about 261.8 inches | 664 cm long, about 117 inches (minimum) | 297 cm wide, and about 138.5 inches | 351 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.

Case IH 4994 Dimensions FAQ

Is the Case IH 4994 a long tractor?

The Case IH 4994 is a longer tractor at 261.8 in, which is above the 190 in benchmark average. Plan more shed, trailer and turning-space allowance than an average tractor in this range.

Is the Case IH 4994 narrow enough for tight storage?

No, based on width alone it is on the wide side at 117 in, which is above the 96 in benchmark average. Use the exact tire stance before judging gate, trailer or garage fit.

Is the Case IH 4994 tall for a shed or garage?

The listed height is about normal at 138.5 in, which is close to the 125 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.

How much floor space does the Case IH 4994 need?

The bare footprint is about 213 sq ft from a 21.8 ft length and 9.8 ft width. That is above the 130 sq ft benchmark, so it needs more floor space than average.

Does the Case IH 4994 have a short or long wheelbase?

The wheelbase is average for the category at 124.8 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.

Will the Case IH 4994 fit easily in storage?

Be careful. Based on length 261.8 in, width 117 in and height 138.5 in, at least one main dimension is above the category benchmark, so use the actual measured setup before planning clearance.

Official information note

Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.