The Case IH 4994 specifications include engine power rated at 400 hp (298.3 kW), a full power shift transmission and a listed weight of 26,500 to 31,315 lbs.
Case IH 4994 key specifications
| Engine power |
400 hp (298.3 kW) |
| PTO power |
344 hp (256.5 kW) |
| Displacement |
866 cu in (14.2 L) |
| Transmission |
full power shift |
| Fuel capacity |
300 gal (1135.5 L) |
| Weight |
26,500 to 31,315 lbs |
| Wheelbase |
124.8 inches (316 cm) |
Case IH 4994 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power400 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power344 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement14.2 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity300 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight31,315 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase124.8 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 4994 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power294.2 hp
Case IH 4994 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity1,135.5 L
Hydraulic capacity100.3 L
Case IH 4994 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Power and performance
| Original price |
$130,000 in 1987 |
Engine specifications
| Bore/Stroke |
5.00 × 5.51 inches (127 × 140 mm) |
| Rated RPM |
2,100 |
| Torque |
1,140 lb-ft (1,545.8 Nm) |
| Torque RPM |
1,300 |
| Compression |
15.5:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
27 qt (25.6 L) |
| Coolant capacity |
88 qt (83.3 L) |
| Starter volts |
12 |
| Firing order |
1-5-4-2-6-3-7-8 |
| Intake valve clearance |
0.018 inches (0.457 mm) |
| Exhaust valve clearance |
0.031 inches (0.787 mm) |
Transmission options
| Gears |
12 forward and 2 reverse |
| Clutch |
hydraulic wet disc |
| Oil capacity |
63 qt (59.6 L) |
| Oil type |
Case Powergard PTF |
PTO and hitch
| Drawbar (tested) |
294.24 hp (219.4 kW) |
| Rear PTO |
independent (optional) |
| Rear PTO speed |
1,000 rpm |
| PTO engine speed |
1,000 PTO rpm at 2,100 engine rpm |
Hydraulics
| Hydraulic capacity |
26.5 gal (100.3 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,000 psi (137.9 bar) |
| Valves |
4 |
| Total flow |
35 gpm (132.5 L/min) |
| Steering flow |
20 gpm (75.7 L/min) |
| Steering pressure |
2,000 psi (137.9 bar) |
Capacities
| Front hub oil capacity |
13.5 qt (12.8 L, each) |
| Front differential oil capacity |
17 qt (16.1 L) |
Mechanical specifications
| Drive |
4×4 4WD |
| Steering |
hydraulic, front, rear or four-wheel crab steering |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
105 |
| Batteries |
2 |
| Battery volts |
12 |
| Battery AH |
300 |
| Battery Group |
30H |
Dimensions and weight
| Length |
261.8 inches (664 cm) |
| Width |
117 inches (297 cm, minimum) |
| Shipping weight |
26,500 lbs (12,020 kg) |
| Operating weight |
31,315 lbs (14,204 kg) |
| Ballasted weight |
39,930 lbs (18,112 kg) |
| Exhaust height |
138.5 inches (351 cm) |
| Drawbar clearance |
14.5 inches (36 cm) |
| Maximum permitted weight |
40,000 lbs (18,144 kg) |
Tires and tread
| Front tire |
24.5-32 or 20.8-38 |
| Rear tire |
24.5-32 or 20.8-38 |
Production information
Other specifications
| Rear hubs |
13.5 qt (12.8 L, each) |
| Rear diff. |
22.5 qt (21.3 L) |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
