The Case IH 4494 dimensions found are: length is 225 inches | 571 cm, width is 96 inches (minimum) | 243 cm, height is 125 inches | 317 cm, and wheelbase is 102 inches | 259 cm.
Length225 inches | 571 cm
Width96 inches (minimum) | 243 cm
Height125 inches | 317 cm
Wheelbase102 inches | 259 cm
Case IH 4494 Dimensions
Overall length
225 inches | 571 cm
Overall width
96 inches (minimum) | 243 cm
Overall height
Exhaust: 125 inches | 317 cm
Wheelbase
102 inches | 259 cm
Ground clearance
Frame: 18 inches (frame) | 45 cm
Front tread
74 to 123 inches | 187 to 312 cm
Rear tread
74 to 123 inches | 187 to 312 cm
Case IH 4494 Weight
Operating weight
20,840 lbs (18.4-34 duals) | 9453 kg
Ballasted weight
22,450 lbs | 10183 kg
Case IH 4494 Tire Size Notes
Ag front
18.4-34
Ag rear
18.4-34
Case IH 4494 Dimension Comparison Charts
Length comparison
This model
225 in
Average
190 in
Low
155 in
High
240 in
Width comparison
This model
96 in
Average
96 in
Low
78 in
High
120 in
Height comparison
This model
125 in
Average
125 in
Low
105 in
High
150 in
Wheelbase comparison
This model
102 in
Average
115 in
Low
95 in
High
145 in
Ground clearance comparison
This model
18 in
Average
18 in
Low
12 in
High
26 in
Weight comparison
This model
20,840 lbs
Average
13,000 lbs
Low
8,000 lbs
High
22,000 lbs
Floor space footprint
This model
150 sq ft
Average
130 sq ft
Low
90 sq ft
High
200 sq ft
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 4494 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 4494 is about 225 inches | 571 cm long, about 96 inches (minimum) | 243 cm wide, and about 125 inches | 317 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 4494 Dimensions FAQ
Is the Case IH 4494 a long tractor?
The Case IH 4494 is a longer tractor at 225 in, which is above the 190 in benchmark average. Plan more shed, trailer and turning-space allowance than an average tractor in this range.
Is the Case IH 4494 narrow enough for tight storage?
The listed width is middle-of-the-pack at 96 in, which is close to the 96 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH 4494 tall for a shed or garage?
The listed height is about normal at 125 in, which is close to the 125 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH 4494 need?
The bare footprint is about 150 sq ft from a 18.8 ft length and 8 ft width. That is above the 130 sq ft benchmark, so it needs more floor space than average.
Does the Case IH 4494 have a short or long wheelbase?
The wheelbase is average for the category at 102 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 4494 have good ground clearance?
The listed ground clearance is average at 18 in, which is close to the 18 in benchmark average. It is neither especially low nor especially high for this category.
Is the Case IH 4494 heavy for its size?
The listed weight is heavy for the category at 20,840 lbs, which is above the 13,000 lbs benchmark average. Plan trailer, shed floor and transport decisions around the real operating setup, not just the bare spec.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
