The Case IH 4694 specifications include engine power rated at 261 hp (194.6 kW), a partial power shift transmission and a listed weight of 22,310 lbs (10,119 kg).
Case IH 4694 key specifications
| Engine power |
261 hp (194.6 kW) |
| PTO power |
219 hp (163.3 kW) |
| Displacement |
504 cu in (8.3 L) |
| Transmission |
partial power shift |
| Fuel capacity |
128 gal (484.5 L) |
| Weight |
22,310 lbs (10,119 kg) |
| Wheelbase |
102 inches (259 cm) |
Case IH 4694 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power261 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power219 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity128 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight22,310 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase102 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 4694 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power189.8 hp
Case IH 4694 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity484.5 L
Case IH 4694 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Power and performance
| Original price |
$81,000 in 1987 |
Engine specifications
| Bore/Stroke |
4.625 × 5.00 inches (117 × 127 mm) |
| Rated RPM |
2,200 |
| Torque |
680 lb-ft (922.1 Nm) |
| Torque RPM |
1,650 |
| Compression |
15.8:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
24 qt (22.7 L) |
| Coolant capacity |
48 qt (45.4 L) |
| Starter volts |
12 |
Transmission options
| Gears |
12 forward and 4 reverse |
| Clutch |
hydraulic wet disc |
PTO and hitch
| Drawbar (tested) |
189.75 hp (141.5 kW) |
| PTO (tested) |
219.62 hp (163.8 kW) |
| Rear hitch category |
Category III (optional) |
| Rear lift (at 24"/610mm) |
12,750 lbs (5,783 kg) |
| Rear PTO |
independent (optional) |
| Rear PTO speed |
1,000 rpm |
| PTO engine speed |
1,000 PTO rpm at 2,200 engine rpm |
Hydraulics
| Hydraulic capacity |
15.5 gal (58.7 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,350 psi (162.0 bar) |
| Valves |
2 to 4 |
| Total flow |
31 gpm (117.3 L/min) |
Mechanical specifications
| Drive |
4×4 4WD |
| Steering |
hydraulic, front, rear or four-wheel crab steering |
Electrical specifications
| Electrical ground |
negative |
| Battery volts |
12 |
Dimensions and weight
| Length |
225 inches (571 cm) |
| Width |
96 inches (243 cm, minimum) |
| Ground clearance |
18 inches (45 cm, frame) |
| Operating weight |
22,310 lbs (10,119 kg, with 20.8-34 duals) |
| Ballasted weight |
25,230 lbs (11,444 kg) |
| Exhaust height |
125 inches (317 cm) |
Tires and tread
| Front tread |
76 to 139 inches (193 to 353 cm) |
| Rear tread |
76 to 139 inches (193 to 353 cm) |
| Front tire |
18.4-34 |
| Rear tire |
18.4-34 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
