The Case IH 4494 specifications include engine power rated at 213 hp (158.8 kW), a partial power shift transmission and a listed weight of 20,840 lbs (9,453 kg).
Case IH 4494 key specifications
| Engine power |
213 hp (158.8 kW) |
| PTO power |
175 hp (130.5 kW) |
| Displacement |
504 cu in (8.3 L) |
| Transmission |
partial power shift |
| Fuel capacity |
128 gal (484.5 L) |
| Weight |
20,840 lbs (9,453 kg) |
| Wheelbase |
102 inches (259 cm) |
Case IH 4494 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power213 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power175 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity128 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight20,840 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase102 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 4494 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power150.1 hp
Case IH 4494 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity484.5 L
Case IH 4494 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Power and performance
| Original price |
$74,600 in 1987 |
Engine specifications
| Bore/Stroke |
4.625 × 5.00 inches (117 × 127 mm) |
| Rated RPM |
2,200 |
| Torque |
560 lb-ft (759.4 Nm) |
| Torque RPM |
1,650 |
| Compression |
15.8:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
24 qt (22.7 L) |
| Coolant capacity |
48 qt (45.4 L) |
| Starter volts |
12 |
Transmission options
| Gears |
12 forward and 4 reverse |
| Clutch |
hydraulic wet disc |
PTO and hitch
| Drawbar (tested) |
150.14 hp (112.0 kW) |
| PTO (tested) |
175.20 hp (130.6 kW) |
| Rear hitch category |
Category III (optional) |
| Rear lift (at 24"/610mm) |
12,750 lbs (5,783 kg) |
| Rear PTO |
independent (optional) |
| Rear PTO speed |
1,000 rpm |
| PTO engine speed |
1,000 PTO rpm at 2,200 engine rpm |
Hydraulics
| Hydraulic capacity |
15.5 gal (58.7 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,350 psi (162.0 bar) |
| Valves |
2 to 4 |
| Total flow |
31 gpm (117.3 L/min) |
Mechanical specifications
| Drive |
4×4 4WD |
| Steering |
hydraulic, front, rear or four-wheel crab steering |
Electrical specifications
| Electrical ground |
negative |
| Battery volts |
12 |
Dimensions and weight
| Length |
225 inches (571 cm) |
| Width |
96 inches (243 cm, minimum) |
| Ground clearance |
18 inches (45 cm, frame) |
| Operating weight |
20,840 lbs (9,453 kg, 18.4-34 duals) |
| Ballasted weight |
22,450 lbs (10,183 kg) |
| Exhaust height |
125 inches (317 cm) |
Tires and tread
| Front tread |
74 to 123 inches (187 to 312 cm) |
| Rear tread |
74 to 123 inches (187 to 312 cm) |
| Front tire |
18.4-34 |
| Rear tire |
18.4-34 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
