The Case IH 4694 tractor engine horsepower is 261 hp | 194.6 kW, PTO horsepower is 219 hp | 163.3 kW, and the drawbar horsepower is 189.75 hp | 141.5 kW.
Case IH 4694 Horsepower Specs
| Engine horsepower | 261 hp | 194.6 kW |
|---|---|
| PTO horsepower claimed | 219 hp | 163.3 kW |
| PTO horsepower tested | 219.62 hp | 163.8 kW |
| Drawbar horsepower tested | 189.75 hp | 141.5 kW |
Case IH 4694 Useful Horsepower Calculations
| PTO-to-engine power transfer | 83.9% of engine hp reaches the PTO |
|---|---|
| Drawbar-to-engine power transfer | 72.7% of engine hp reaches the drawbar |
| Drawbar-to-PTO power ratio | 86.6% drawbar hp vs PTO hp |
| Engine size per PTO horsepower | 2.3 ci per PTO hp |
| PTO horsepower per liter | 26.4 PTO hp per L |
| Engine size per engine horsepower | 1.9 ci per engine hp |
| Engine horsepower per liter | 31.4 engine hp per L |
| Torque per PTO horsepower | 3.1 lb-ft per PTO hp |
| Fuel tank per PTO horsepower | 0.6 gal per PTO hp |
Case IH 4694 Engine Specs
| Engine type | turbocharged intercooled diesel |
|---|---|
| Displacement | 504 ci | 8.3 L |
| Bore and stroke | 4.625×5.00 inches | 117 x 127 mm |
| Compression | 15.8:1 |
| Rated RPM | 2200 |
| Torque | 680 lb-ft | 922.1 Nm |
| Torque RPM | 1650 |
Case IH 4694 Fuel, Cooling, Starting & Service Specs
| Fuel capacity | 128 gal | 484.5 L |
|---|---|
| Starter volts | 12 |
| Battery volts | 12 |
Case IH 4694 Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Drawbar horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH 4694 Horsepower FAQ
How much horsepower does the Case IH 4694 have?
The listed engine output is 261 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 261 hp.
How much PTO horsepower does the Case IH 4694 have?
The listed PTO output is 219 hp, above the 175 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 219 hp.
How much drawbar horsepower does the Case IH 4694 have?
The listed drawbar output is 189.8 hp, above the 150 hp benchmark average. That makes the 189.8 hp drawbar number more useful than engine hp for tillage and heavy pulling.
How much engine power reaches the PTO on the Case IH 4694?
The PTO-to-engine transfer works out to 83.9%, from 261 engine hp to 219 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Case IH 4694 for pulling work?
The drawbar-to-engine transfer is about 72.7%, from 261 engine hp to 189.8 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Case IH 4694 better judged by PTO hp or drawbar hp?
The drawbar output is about 86.6% of PTO output, comparing 189.8 drawbar hp with 219 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Case IH 4694 engine?
The engine displacement is 504 ci, close to the 520 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Case IH 4694 engine stressed for its PTO horsepower?
The engine has about 2.3 cubic inches per PTO hp, using 504 ci and 219 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH 4694 make?
The output density is about 26.4 PTO hp per liter, using 219 PTO hp and 8.3 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
