The Case IH 4894 specifications include engine power rated at 300 hp (223.7 kW), a partial power shift transmission and a listed weight of 25,750 lbs (11,680 kg).
Case IH 4894 key specifications
| Engine power |
300 hp (223.7 kW) |
| PTO power |
253 hp (188.7 kW) |
| Displacement |
674 cu in (11.0 L) |
| Transmission |
partial power shift |
| Fuel capacity |
150 gal (567.8 L) |
| Weight |
25,750 lbs (11,680 kg) |
| Wheelbase |
110 inches (279 cm) |
Case IH 4894 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power300 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power253 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement11 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity150 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight25,750 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase110 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 4894 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power218.7 hp
Case IH 4894 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity567.8 L
Case IH 4894 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Power and performance
| Original price |
$95,000 in 1987 |
Engine specifications
| Bore/Stroke |
5.00 × 5.71 inches (127 × 145 mm) |
| Rated RPM |
2,200 |
| Torque |
845 lb-ft (1,145.8 Nm) |
| Torque RPM |
1,400 |
| Compression |
14.7:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
48 qt (45.4 L) |
| Coolant capacity |
44 qt (41.6 L) |
| Starter volts |
12 |
Transmission options
| Gears |
12 forward and 4 reverse |
| Clutch |
hydraulic wet disc |
PTO and hitch
| Drawbar (tested) |
218.68 hp (163.1 kW) |
| PTO (tested) |
253.41 hp (189.0 kW) |
| Rear hitch category |
Category III (optional) |
| Rear lift (at 24"/610mm) |
12,750 lbs (5,783 kg) |
| Rear PTO |
independent (optional) |
| Rear PTO speed |
1,000 rpm |
| PTO engine speed |
1,000 PTO rpm at 2,200 engine rpm |
Hydraulics
| Hydraulic capacity |
18 gal (68.1 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,350 psi (162.0 bar) |
| Valves |
4 |
| Total flow |
27 gpm (102.2 L/min) |
Mechanical specifications
| Drive |
4×4 4WD |
| Steering |
hydraulic, front, rear or four-wheel crab steering |
Electrical specifications
| Electrical ground |
negative |
| Battery volts |
12 |
Dimensions and weight
| Length |
237 inches (601 cm) |
| Width |
99 inches (251 cm, minimum) |
| Ground clearance |
18 inches (45 cm, frame) |
| Ballasted weight |
28,460 lbs (12,909 kg) |
| Exhaust height |
125 inches (317 cm) |
Tires and tread
| Front tire |
18.4-34 |
| Rear tire |
18.4-34 |
Production information
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
