Weight summary
The published J.I. Case 1494 weight is 3,000–10,500 lb (1,360–4,762 kg). The primary figure used for comparisons is 7,380 lb (3,347 kg), listed as Weight — 2WD synchro. The published configurations span 7,500 lb, a 250% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Heavy
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | J.I. Case |
|---|---|
| Model | 1494 |
| Category | Farm tractor |
| Model years | 1983 – 1984 |
| Tractor type | Utility Tractor |
| Published weight variants | 8 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Weight | 2WD synchro | 7,380 lb | 3,347 kg | 3.69 | — |
| Weight | 2WD Hydra-Shift | 7,660 lb | 3,474 kg | 3.83 | — |
| Weight | 4WD synchro | 8,005 lb | 3,631 kg | 4 | — |
| Weight | 4WD Hydra-Shift | 8,180 lb | 3,710 kg | 4.09 | — |
| Max Drawbar | — | 3,000 lb | 1,360 kg | 1.5 | — |
| Max front axle | 2WD | 7,000 lb | 3,175 kg | 3.5 | — |
| Max front axle | 4WD | 7,500 lb | 3,402 kg | 3.75 | — |
| Max rear axle | — | 10,500 lb | 4,762 kg | 5.25 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Case IH 1494 (7380 lb)
- Allis Chalmers H3 (7395 lb)
- Case IH CX100 (7396 lb)
- Case IH 885 (7364 lb)
- John Deere 5700 (7397 lb)
Closest comparable tractors
- Case IH 1494 (7380 lb, 85 hp)
- John Deere 5700 (7397 lb, 85 hp)
- John Deere 1641 (7409 lb)
- Kubota MR87 (7363 lb, 85.8 hp)
- Case IH 885 (7364 lb, 84 hp)
J.I. Case 1494 weight FAQ
How much does a J.I. Case 1494 weigh?
The J.I. Case 1494 weighs 7,380 lb (3,347 kg) using the published Weight — 2WD synchro figure. Across the published configurations on this page, weight ranges from 3,000 to 10,500 lb (1,360 to 4,762 kg).
How much heavier is the 4WD J.I. Case 1494 than the 2WD model?
Published 2WD weight is 7,000–7,660 lb (3,175–3,475 kg), while published 4WD weight is 7,500–8,180 lb (3,402–3,710 kg). On a midpoint basis, the published 4WD configurations are about 510 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the J.I. Case 1494 a heavy utility tractor?
Yes. The representative figure sits at about the 77th percentile, heavier than roughly 77% of the utility tractor peers. That puts it in the heavy range for this comparison. It is 2,117 lb heavier than the peer-group average of 5,263 lb.
How wide is the J.I. Case 1494 for transport?
The maximum published tractor width is 75 in (6.2 ft). That is 27 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
Does the J.I. Case 1494 weigh more than 10,000 lb?
Some configurations do. The representative published weight is 7,380 lb, and the heaviest published configuration on this page is 10,500 lb (5.25 US tons). Any trailer calculation also needs the trailer itself plus fuel, ballast, attachments and other equipment.
What is the J.I. Case 1494 weight-to-horsepower ratio?
Using the page’s representative 7,380 lb weight and 85 hp power figure, the tractor carries about 86.8 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
