The Bobcat T86 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 1000 CCA rating is high for Bobcat skid-steers in this dataset.
ModelT86
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
1000 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps1000 CCA
High
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
1000 CCA
RP
Replacement battery
What to match when buying
The Bobcat T86 skid-steer loader uses a Group 24 battery with 600 cold cranking amps (CCA) as the recommended replacement size and rating.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat T86 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement procedures, it's best to consult the operator's manual or contact a Bobcat dealer.
ID
Model details
Equipment identity
Brand
Bobcat
Model
T86
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Bobcat T86 skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat T86?
Quick answer
The official battery group size for the Bobcat T86 skid steer loader is Group 31. For replacement, ensure to check the specifications for compatibility with your specific model.
?
How many CCA does the Bobcat T86 need?
Quick answer
The recommended battery for the Bobcat T86 skid steer loader typically has a Cold Cranking Amps (CCA) rating of 1000 CCA. It's important to use a battery specifically designed for Bobcat equipment to ensure optimal performance.
?
What voltage battery does the Bobcat T86 use?
Quick answer
The Bobcat T86 skid steer loader uses a 12-volt battery. For specific replacement options, it's best to consult the Bobcat parts catalog or contact a local dealer.
?
Where is the battery on the Bobcat T86?
Quick answer
The battery on the Bobcat T86 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement procedures, it's best to consult the operator's manual or contact a Bobcat dealer.
?
What is the best replacement battery for the Bobcat T86?
Quick answer
The Bobcat T86 skid-steer loader uses a Group 24 battery with 600 cold cranking amps (CCA) as the recommended replacement size and rating.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
