The Bobcat S86 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 600 CCA rating is average for Bobcat skid-steers in this dataset.
ModelS86
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
The Hardcore HCC24SC is a high-capacity Group 24 sealed maintenance-free battery designed for demanding commercial applications, including Bobcat skid-steer loaders, with 82 Ah capacity, 700 CCA at -18°C, and overall dimensions of 272 x 171 x 224 mm.
LC
Battery location
Where the battery is mounted
Family-match guidance: The battery on the Bobcat T86 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement procedures, it's best to consult the operator's manual or contact a Bobcat dealer. Verify the exact access panel/compartment for the machine serial number before service.
ID
Model details
Equipment identity
Brand
Bobcat
Model
S86
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
The Bobcat S86 skid-steer loader battery replacement steps are shown in the official service video "Replace Hydraulic Fluid & Filters on Pro Model & R-Series Loaders," which covers maintenance procedures for Pro Model and R-Series skid-steer loaders including battery service tasks.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat S86?
Quick answer
The official Bobcat S86 skid-steer loader uses a 12 V BCI group 31 battery.
?
How many CCA does the Bobcat S86 need?
Quick answer
The recommended battery for the Bobcat S86 skid steer loader typically requires a battery with a minimum of 600 CCA (Cold Cranking Amps). It's advisable to use a battery specifically designed for Bobcat equipment to ensure optimal performance.
?
What voltage battery does the Bobcat S86 use?
Quick answer
The Bobcat S86 skid-steer loader uses a 12-volt battery. For specific replacement options, it's best to consult the Bobcat parts catalog or contact a local dealer.
?
Where is the battery on the Bobcat S86?
Quick answer
Family-match guidance: The battery on the Bobcat T86 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement procedures, it's best to consult the operator's manual or contact a Bobcat dealer. Verify the exact access panel/compartment for the machine serial number before service.
?
What is the best replacement battery for the Bobcat S86?
Quick answer
The Hardcore HCC24SC is a high-capacity Group 24 sealed maintenance-free battery designed for demanding commercial applications, including Bobcat skid-steer loaders, with 82 Ah capacity, 700 CCA at -18°C, and overall dimensions of 272 x 171 x 224 mm.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
