The Bobcat T 300 H skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 600 CCA rating is average for Bobcat skid-steers in this dataset.
ModelT 300 H
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 600 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat T300 H skid-steer loader is located under the operator's seat.
ID
Model details
Equipment identity
Brand
Bobcat
Model
T 300 H
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
The Bobcat T300 H skid-steer loader battery replacement steps are found in the service manual: disconnect the negative cable first, then the positive, remove the hold-down clamp, lift out the old battery, install the new one in reverse order, and reconnect the positive cable before the negative. SlideShare
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat T 300 H?
Quick answer
Group 31. Best available fitment is based on closest same-brand/model-family match (T 300 ACS); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Bobcat T 300 H need?
Quick answer
The Bobcat T300 skid steer loader requires a battery with a minimum of 600 CCA (Cold Cranking Amps). For specific replacement options, it's best to consult the Bobcat dealer or the official Bobcat website for compatibility.
?
What voltage battery does the Bobcat T 300 H use?
Quick answer
The Bobcat T300 skid steer loader typically uses a 12-volt battery. For specific battery specifications and replacement options, it's best to consult the owner's manual or the Bobcat website directly.
?
Where is the battery on the Bobcat T 300 H?
Quick answer
The battery on the Bobcat T300 H skid-steer loader is located under the operator's seat.
?
What is the best replacement battery for the Bobcat T 300 H?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 600 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
