The Bobcat T 300 SJC skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 650 CCA rating is average for Bobcat skid-steers in this dataset.
ModelT 300 SJC
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
650 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps650 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
650 CCA
RP
Replacement battery
What to match when buying
The Bobcat T300 SJC skid steer loader typically requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA). It's advisable to check with a local dealer for specific recommendations or consider a quality automotive battery that fits the compartment.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat T300 SJC skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or contact a Bobcat dealer.
ID
Model details
Equipment identity
Brand
Bobcat
Model
T 300 SJC
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat T 300 SJC?
Quick answer
The official battery group size for the Bobcat T300 SJC skid steer loader is Group 31. For replacement, it's important to choose a battery that meets the specifications designed for Bobcat equipment.
?
How many CCA does the Bobcat T 300 SJC need?
Quick answer
The recommended battery for the Bobcat T300 SJC skid steer loader has a cold cranking amps (CCA) rating of 650 CCA. For specific replacement options, it's best to check with a Bobcat dealer or the official Bobcat website for compatibility and specifications.
?
What voltage battery does the Bobcat T 300 SJC use?
Quick answer
The Bobcat T300 SJC skid steer loader typically uses a battery with a voltage of 12 volts. For specific replacement options, it's best to consult the manufacturer's guidelines or a local dealer for the correct battery specifications.
?
Where is the battery on the Bobcat T 300 SJC?
Quick answer
The battery on the Bobcat T300 SJC skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or contact a Bobcat dealer.
?
What is the best replacement battery for the Bobcat T 300 SJC?
Quick answer
The Bobcat T300 SJC skid steer loader typically requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA). It's advisable to check with a local dealer for specific recommendations or consider a quality automotive battery that fits the compartment.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
