The Bobcat T 300 H AHC skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 750 CCA rating is high for Bobcat skid-steers in this dataset.
ModelT 300 H AHC
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
750 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps750 CCA
High
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
750 CCA
RP
Replacement battery
What to match when buying
The Bobcat T300 skid steer loader typically requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA). It's advisable to check with a local dealer for specific recommendations and compatibility.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat T300 H AHC skid-steer loader is located under the rear floor panel on the left side of the machine.
ID
Model details
Equipment identity
Brand
Bobcat
Model
T 300 H AHC
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Bobcat T300 H AHC skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat T 300 H AHC?
Quick answer
The official battery group size for the Bobcat T 300 H AHC skid steer loader is Group 24 / N50ZZ. This battery is designed for demanding commercial applications and features high-capacity specifications.
?
How many CCA does the Bobcat T 300 H AHC need?
Quick answer
750 CCA. Best available fitment is based on closest same-brand/model-family match (T 300 ACS); an equal-or-higher CCA replacement is acceptable if the physical size and terminals match.
?
What voltage battery does the Bobcat T 300 H AHC use?
Quick answer
The Bobcat T300 skid steer loader typically uses a 12-volt battery. For specific replacement options and specifications, it's best to consult the Bobcat parts catalog or contact a local dealer for accurate information.
?
Where is the battery on the Bobcat T 300 H AHC?
Quick answer
The battery on the Bobcat T300 H AHC skid-steer loader is located under the rear floor panel on the left side of the machine.
?
What is the best replacement battery for the Bobcat T 300 H AHC?
Quick answer
The Bobcat T300 skid steer loader typically requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA). It's advisable to check with a local dealer for specific recommendations and compatibility.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
