Case IH Farmall 110U Specifications

The Case IH Farmall 110U specifications include engine power rated at 107 hp (79.8 kW), transmission options including 4-speed power shift or creeper and a listed weight of 10,031 lbs (4,550 kg).

Case IH Farmall 110U key specifications

Engine power 107 hp (79.8 kW)
PTO power 93 hp (69.4 kW)
Displacement 207 cu in (3.4 L)
Transmission 4-speed power shift or creeper
Fuel capacity 43.6 gal (165.0 L)
Weight 10,031 lbs (4,550 kg)
Wheelbase 93.7 inches (237 cm)

Case IH Farmall 110U industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power107 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power93 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement3.4 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity43.6 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight10,031 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase93.7 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average

Case IH Farmall 110U power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power107 hp
PTO power93 hp
Tested PTO power99.4 hp
Tested drawbar power71.6 hp

Case IH Farmall 110U capacity chart

Compare the tractor's listed fuel, hydraulic and service-fluid capacities.

Maximum fuel capacity165 L
DEF capacity12.1 L

Case IH Farmall 110U dimensions chart

Compare the main listed tractor dimensions using centimetres.

Length419 cm
Wheelbase237 cm
Width224 cm
Cab height271 cm

Engine specifications

Bore/Stroke 3.90 × 4.33 inches (99 × 110 mm)
Rated RPM 2,300
Fuel system electronic high-pressure common rail direct injection
Starter electric
Starter volts 12
Emissions Tier IV

Transmission options

Gear options 16 forward and reverse or 32 forward and reverse

PTO and hitch

Drawbar (tested) 71.6 hp (53.4 kW)
PTO (tested) 99.4 hp (74.1 kW)
Rear hitch category Category II
Hitch control electronic draft control
Rear lift (at 24"/610mm) 8,809 lbs (3,995 kg)
Drawbar Cat. 2
Rear PTO independent
Rear PTO speed 540 or 1,000 rpm

Hydraulics

Hydraulic type open center
Rear valves 2 or 3
Pump flow 21.1 gpm (79.9 L/min)

Capacities

Exhaust fluid (DEF) 3.2 gal (12.1 L)

Mechanical specifications

Final drives inboard planetary

Electrical specifications

Electrical ground negative
Charging system alternator
Charging amps 120
Battery volts 12

Dimensions and weight

Length 165 inches (419 cm)
Width 88.5 inches (224 cm, width across fenders)
Ballasted weight 13,669 lbs (6,200 kg, field)
Cab height 107 inches (271 cm)

Tires and tread

Standard tires (ag) Front: 14.9R24. Rear: 460/85R34

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.