The Case IH 9250 specifications include engine power rated at 300 hp (223.7 kW), a full power shift transmission and a listed weight of 30,060 lbs (13,635 kg).
Case IH 9250 key specifications
| Engine power |
300 hp (223.7 kW) |
| PTO power |
266 hp (198.4 kW) |
| Displacement |
611 cu in (10.0 L) |
| Transmission |
full power shift |
| Fuel capacity |
200 gal (757.0 L) |
| Weight |
30,060 lbs (13,635 kg) |
| Wheelbase |
131 inches (332 cm) |
Case IH 9250 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power300 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power266 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement10 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity200 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight30,060 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase131 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 9250 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power237.3 hp
Case IH 9250 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity757 L
Case IH 9250 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.921 × 5.354 inches (125 × 136 mm) |
| Rated RPM |
2,100 |
| Torque |
1,015 lb-ft (1,376.3 Nm) |
| Torque RPM |
1,400 |
| Compression |
16.0:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
44 qt (41.6 L) |
| Coolant capacity |
54 qt (51.1 L) |
| Starter volts |
12 |
Transmission options
| Gears |
12 forward and 3 reverse |
| Clutch |
hydraulic wet disc |
PTO and hitch
| Drawbar (tested) |
237.29 hp (176.9 kW) |
| PTO (tested) |
271.01 hp (202.1 kW) |
| Rear hitch category |
Category III (optional) |
| Hitch control |
draft control (optional) |
| Rear lift |
12,750 lbs (5,783 kg) |
| Rear PTO |
independent (optional) |
| Rear PTO speed |
1,000 rpm |
| PTO engine speed |
1,000 PTO rpm at 2,098 engine rpm |
Hydraulics
| Hydraulic capacity |
18 gal (68.1 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,500 psi (172.4 bar) |
| Valves |
4 |
| Total flow |
27 gpm (102.2 L/min) |
Mechanical specifications
| Steering |
hydrostatic power with articulation and front-axle steering |
Electrical specifications
| Electrical ground |
negative |
| Battery volts |
12 |
Dimensions and weight
| Length |
272.9 inches (693 cm) |
| Width |
93.5 inches (237 cm, minimum) |
| Operating weight |
30,060 lbs (13,635 kg, 20.8R42 duals) |
| Exhaust height |
143 inches (363 cm) |
Tires and tread
| Front tread |
60 to 130 inches (152 to 330 cm) |
| Rear tread |
60 to 130 inches (152 to 330 cm) |
| Front tire |
20.8-38 |
| Rear tire |
20.8-38 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
