The Case IH Farmall 95N specifications include engine power rated at 95 hp (70.8 kW), transmission options including mechanical shuttle or power shuttle and a listed weight of 5,820 to 6,107 lbs.
Case IH Farmall 95N key specifications
Engine power
95 hp (70.8 kW)
PTO power
82 hp (61.1 kW)
Displacement
274 cu in (4.5 L)
Transmission
mechanical shuttle or power shuttle
Fuel capacity
20 gal (75.7 L)
Weight
5,820 to 6,107 lbs
Wheelbase
85.6 inches (217 cm)
Case IH Farmall 95N industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power95 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power82 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement4.5 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity20 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight6,107 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase85.6 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH Farmall 95N power chart
Compare the available engine, PTO and drawbar power ratings.
Engine power95 hp
PTO power82 hp
Case IH Farmall 95N dimensions chart
Compare the main listed tractor dimensions using centimetres.
Length401 cm
Wheelbase217 cm
Width135 cm
Cab height230 cm
ROPS height232 cm
Ground clearance26 cm
Engine specifications
Bore/Stroke
4.095 × 5.20 inches (104 × 132 mm)
Rated RPM
2,300
Fuel system
mechanical direct injection
Starter
electric
Starter volts
12
Emissions
Tier III
Transmission options
Gear options
16 forward and reverse or 32 forward and 16 reverse
Clutch
dry disc or wet disc
PTO and hitch
Rear hitch category
Category II
Hitch control
lower link draft sensing
Rear lift (at 24"/610mm)
4,400 lbs (1,995 kg)
Rear PTO
independent
Rear PTO speed
540 rpm
Hydraulics
Hydraulic type
open center
Rear valves
2 or 3
Pump flow
12.7 gpm (48.1 L/min)
Total flow
26.4 gpm (99.9 L/min)
Steering flow
9.2 gpm (34.8 L/min)
Mechanical specifications
Final drives
inboard planetary
Differential lock
electro-hydraulic
Steering
hydrostatic power
Electrical specifications
Electrical ground
negative
Charging system
alternator
Charging amps
120
Battery CCA
800
Battery volts
12
Dimensions and weight
Length
158 inches (401 cm)
Width
53.4 inches (135 cm, min)
Ground clearance
10.5 inches (26 cm)
Weight
5,820 lbs (2,639 kg, ROPS)
Hood height
51 inches (129 cm)
ROPS height
91.6 inches (232 cm)
Cab height
90.7 inches (230 cm)
Tires and tread
Front tire
7.50R18
Rear tire
14.9R28
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
