The Case IH DX26 specifications include engine power rated at 26 hp (19.4 kW), a hydrostatic transmission and a listed weight of 1,599 lbs (725 kg).
Case IH DX26 key specifications
| Engine power |
26 hp (19.4 kW) |
| PTO power |
20.5 hp (15.3 kW) |
| Displacement |
69 cu in (1.1 L) |
| Transmission |
hydrostatic |
| Fuel capacity |
5.3 gal (20.1 L) |
| Weight |
1,599 lbs (725 kg) |
| Wheelbase |
57.5 inches (146 cm) |
Case IH DX26 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power26 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power20.5 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement1.1 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity5.3 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight1,599 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase57.5 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH DX26 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH DX26 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity20.1 L
Case IH DX26 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
3.03 × 3.19 inches (77 × 81 mm) |
| Rated RPM |
2,850 |
| Compression |
23.1:1 |
| Oil capacity |
3.5 qt (3.3 L) |
| Coolant capacity |
3.7 qt (3.5 L) |
| Starter volts |
12 |
| Engine speed range |
1,100-3,075 |
| Firing order |
1-2-3 |
| Intake valve clearance |
0.008 inches (0.203 mm, cold) |
| Exhaust valve clearance |
0.008 inches (0.203 mm, cold) |
| Oil change |
100 h |
Transmission options
| Gears |
infinite forward and reverse (2-range) |
PTO and hitch
| Rear hitch category |
Category I |
| Hitch control |
position control |
| Rear lift (at 24"/610mm) |
1,265 lbs (573 kg) |
| Hydro Rear PTO |
independent |
| Rear PTO speed |
540 rpm, 1.375-inch shaft |
| PTO engine speed |
540 PTO rpm at 2,388 engine rpm (gear) |
| Mid PTO |
independent |
| Mid PTO speed |
2,000 rpm, 1.0-inch shaft |
Hydraulics
| Hydraulic capacity |
4.23 gal (16.0 L) |
| Hydraulic type |
open center |
| Hydraulic pressure |
1,849 psi (127.5 bar) |
| Pump flow |
5.3 gpm (20.1 L/min) |
| Total flow |
8.3 gpm (31.4 L/min) |
| Steering flow |
3.0 gpm (11.4 L/min) |
Mechanical specifications
| Clutch |
mechanical dry disc |
| Differential lock |
mechanical rear |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
40 |
| Battery CCA |
450 |
| Battery volts |
12 |
Dimensions and weight
| Length |
106.3 inches (270 cm) |
| Width |
44.7 inches (113 cm, minimum) |
| Ground clearance |
10.7 inches (27 cm) |
| Height (steering wheel) |
50.8 inches (129 cm) |
| ROPS height |
81.2 inches (206 cm) |
| Folded ROPS height |
68.2 inches (173 cm) |
Tires and tread
| Front tread |
33.3 inches (84 cm) |
| Rear tread |
35.2 inches (89 cm) |
| Front tire |
5-12 or 6-12 |
| Rear tire |
9.5-16 |
| Lawn/turf front tire |
23-8.50-12 |
| Lawn/turf rear tire |
31-13.5-15 |
| Industrial front tire |
23-8.50-12 |
| Industrial rear tire |
12-16.5 |
Attachments
| Attachment weight |
490 lbs * Weight without bucket 222 kg |
| Bucket width |
48 or 54 inches (121 or 137 cm) |
| * Weight without bucket |
222 kg |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
