The Case IH Farmall 40B tractor weighs 3,725 lb (1,689 kg) using its primary published weight. That places it around the 40th percentile among comparable utility tractors, close to the middle of its peer group. With 41 hp, the tractor carries about 90.8 lb of published weight per horsepower.
The published Case IH Farmall 40B weight is 3,725 lb (1,689 kg). The primary figure used for comparisons is 3,725 lb (1,689 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Average
3,725 lb
Low1,537 lb
This model3,725 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight3,725 lb (1,689 kg)
Overall weight bandMidweight
Tractor typeUtility Tractor
Primary horsepower41 hp / 30.6 kW
Max length121 in (307 cm)
Max height96 in (243 cm)
Overview
Model information
Manufacturer
Case IH
Model
Farmall 40B
Category
Farm tractor
Model years
2012 – 2014
Tractor type
Utility Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
3,725 lb
1,689 kg
1.86
—
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase69 in (175 cm)
Length121 in (307 cm)
Height96 in (243 cm)
Power & weight ratios
Primary power41 hp (30.6 kW)
Power basisEngine (gross)
Weight per horsepower90.8 lb/hp
Weight per foot of length369.4 lb/ft
Wheelbase / length57%
Transport snapshot
Primary published weight3,725 lb (1,689 kg)
Maximum published weight3,725 lb (1,689 kg)
Maximum US-ton equivalent1.86 US tons
Weight context
Weight range3,725 lb (1,689 kg)
Primary weight basisWeight
Peer positionAverage among Utility Tractor peers · 41st percentile
Physical size classBelow-average size
For transport planning, the representative published tractor weight is about 3,725 lb (1.86 US tons); published configurations reach 3,725 lb (1.86 US tons). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Massey Ferguson 145V (3731 lb)
Kubota MX5800 (3734 lb)
Kubota MX4900 (3716 lb)
Massey Ferguson 1648 (3715 lb)
Kubota L4060 (3737 lb)
Closest comparable tractors
Kubota L4060 (3737 lb, 42 hp)
Ford 2110 (3635 lb)
Massey Ferguson 230 (3840 lb)
John Deere 4044M (3770 lb, 42.5 hp)
John Deere 4044R (3770 lb, 42.5 hp)
Common questions
Case IH Farmall 40B weight FAQ
How much does a Case IH Farmall 40B weigh?
The Case IH Farmall 40B weighs 3,725 lb (1,689 kg) using the primary published weight figure.
Is the Case IH Farmall 40B heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 41st percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 1,538 lb lighter than the peer-group average of 5,263 lb.
What is the Case IH Farmall 40B weight-to-horsepower ratio?
Using the page’s representative 3,725 lb weight and 41 hp power figure, the tractor carries about 90.8 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Case IH Farmall 40B weigh?
The representative published weight is about 1.86 US tons, while the full published range is 1.86 US tons. Loaded transport weight can be higher than the tractor specification.
