The Case IH DX23 specifications include engine power rated at 23 hp (17.2 kW), transmission options including hydrostatic or gear and a listed weight of 1,495 to 1,592 lbs.
Case IH DX23 key specifications
Engine power
23 hp (17.2 kW)
Displacement
61.3 cu in (1.0 L)
Transmission
hydrostatic or gear
Fuel capacity
5.3 gal (20.1 L)
Weight
1,495 to 1,592 lbs
Wheelbase
57.5 inches (146 cm)
Rear PTO
540 rpm, 1.375-inch shaft
Case IH DX23 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power23 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
Displacement1 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity5.3 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight1,592 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase57.5 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH DX23 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity20.1 L
Hydraulic capacity16 L
Engine oil2.8 L
Coolant3.5 L
Case IH DX23 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Length270 cm
Wheelbase146 cm
Width113 cm
ROPS height206 cm
Ground clearance27 cm
Engine specifications
Bore/Stroke
3.031 × 2.835 inches (77 × 72 mm)
Rated RPM
2,850
Compression
24:1
Oil capacity
3 qt (2.8 L)
Coolant capacity
3.7 qt (3.5 L)
Starter volts
12
Engine speed range
1,100-3,075
Firing order
1-2-3
Intake valve clearance
0.008 inches (0.203 mm, cold)
Exhaust valve clearance
0.008 inches (0.203 mm, cold)
Oil change
100 h
Transmission options
Gear options
infinite forward and reverse (2-range) or 9 forward and 3 reverse
PTO and hitch
Hydro PTO (claimed)
17.5 hp (13.0 kW)
Gear PTO (claimed)
18.5 hp (13.8 kW)
Rear hitch category
Category I
Hitch control
position control
Rear lift (at 24"/610mm)
1,265 lbs (573 kg)
Hydro Rear PTO
independent
PTO engine speed
540 PTO rpm at 2,388 engine rpm (gear)
Hydro Mid PTO
independent
Mid PTO speed
2,000 rpm, 1.0-inch shaft
Hydraulics
Hydraulic capacity
4.23 gal (16.0 L)
Hydraulic type
open center
Hydraulic pressure
1,849 psi (127.5 bar)
Pump flow
5.3 gpm (20.1 L/min)
Total flow
8.3 gpm (31.4 L/min)
Steering flow
3.0 gpm (11.4 L/min)
Mechanical specifications
Clutch
mechanical dry disc
Differential lock
mechanical rear
Electrical specifications
Electrical ground
negative
Charging system
alternator
Charging amps
40
Battery CCA
450
Battery volts
12
Dimensions and weight
Length
106.3 inches (270 cm)
Width
44.7 inches (113 cm, minimum)
Ground clearance
10.7 inches (27 cm)
Height (steering wheel)
50.8 inches (129 cm)
ROPS height
81.2 inches (206 cm)
Folded ROPS height
68.2 inches (173 cm)
Gear Weight
1,495 lbs (678 kg)
Hydro Weight
1,592 lbs (722 kg)
Tires and tread
Front tread
33.3 inches (84 cm)
Rear tread
35.2 inches (89 cm)
Front tire
5-12 or 6-12
Rear tire
9.5-16
Lawn/turf front tire
23-8.50-12
Lawn/turf rear tire
31-13.5-15
Industrial front tire
23-8.50-12
Industrial rear tire
12-16.5
Attachments
Attachment weight
490 lbs * Weight without bucket 222 kg
Bucket width
48 or 54 inches (121 or 137 cm)
* Weight without bucket
222 kg
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
