The Case IH CS 110 specifications include PTO power rated at 92.7 hp (69.1 kW), transmission options including four-speed power shift or creeper and a listed weight of 11,056 lbs (5,015 kg).
Case IH CS 110 key specifications
PTO power
92.7 hp (69.1 kW)
Displacement
268.5 cu in (4.4 L)
Transmission
four-speed power shift or creeper
Fuel capacity
58.1 gal (219.9 L)
Weight
11,056 lbs (5,015 kg)
Wheelbase
99.6 inches (252 cm)
Rear PTO
independent
Case IH CS 110 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
PTO power92.7 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement4.4 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity58.1 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight11,056 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase99.6 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH CS 110 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity219.9 L
Engine oil14 L
Case IH CS 110 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Length454 cm
Wheelbase252 cm
Width239 cm
Ground clearance52 cm
Power and performance
Net engine power
103.6 hp (77.3 kW)
Engine specifications
Bore/Stroke
4.25 × 4.72 inches (108 × 120 mm)
Rated RPM
2,300
Torque
314.9 lb-ft (427.0 Nm)
Torque RPM
1,500
Oil capacity
14.8 qt (14.0 L)
Rated Power (net)
103.6 hp (77.3 kW)
Maximum Power (net)
108.5 hp (80.9 kW)
Operating RPM
1,850-2,300
Oil change
250 h
Transmission options
Gear options
24 forward and reverse or 40 forward and reverse
PTO and hitch
Rear hitch category
Category III
Rear PTO speed
540 or 1,000 rpm, 1.375-inch shaft
PTO engine speed
540 PTO rpm at 2,200 engine rpm
Front PTO speed
1,000 rpm
Hydraulics
Hydraulic pressure
2,683 psi (185.0 bar)
Pump flow
21.1 gpm (79.9 L/min)
Dimensions and weight
Length
179.1 inches (454 cm)
Width
94.1 inches (239 cm)
Height
114.2 inches (290 cm)
Ground clearance
20.5 inches (52 cm)
Maximum permitted weight
18,739 lbs (8,500 kg)
Tires and tread
Standard tires (ag)
Front: 540/65R24. Rear: 600/65R38
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
