The Case IH Quadtrac 9380QT specifications include engine power rated at 400 hp (298.3 kW), a full power shift transmission and a listed weight of 44,000 lbs (19,958 kg).
Case IH Quadtrac 9380QT key specifications
Engine power
400 hp (298.3 kW)
PTO power
356 hp (265.5 kW)
Displacement
855 cu in (14.0 L)
Transmission
full power shift
Fuel capacity
250 gal (946.2 L)
Weight
44,000 lbs (19,958 kg)
Wheelbase
148 inches (375 cm)
Case IH Quadtrac 9380QT industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power400 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power356 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement14 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity250 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight44,000 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase148 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH Quadtrac 9380QT power chart
Compare the available engine, PTO and drawbar power ratings.
Engine power400 hp
PTO power356 hp
Case IH Quadtrac 9380QT dimensions chart
Compare the main listed tractor dimensions using centimetres.
Wheelbase375 cm
Width76 cm
Cab height356 cm
Engine specifications
Bore/Stroke
5.50 × 6.00 inches (140 × 152 mm)
Rated RPM
2,100
Starter
electric
Starter volts
12
Transmission options
Gears
12 forward and 3 reverse
PTO and hitch
Rear hitch category
Category IV
Rear lift (at 24"/610mm)
17,000 lbs (7,711 kg)
Rear PTO
independent
Rear PTO speed
1,000 rpm
Hydraulics
Hydraulic type
closed center
Hydraulic pressure
2,900 psi (200.0 bar)
Valves
4
Pump flow
27 gpm (102.2 L/min)
Steering flow
31 gpm (117.3 L/min)
Mechanical specifications
Drive
crawler
Electrical specifications
Electrical ground
negative
Charging system
alternator
Charging amps
125
Batteries
3
Battery CCA
625
Battery volts
12
Dimensions and weight
Width
30 inches (76 cm) or 120 inches (304 cm)
Cab height
140.4 inches (356 cm)
Front axle type
Bar: 4 inch diameter 101 mm
Rear axle bar
4 inch diameter 101 mm
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
