The Case IH Quadtrac 9380QT tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 27 gpm | 102.2 lpm, hydraulic pressure is 2900 psi | 200.0 bar, and hydraulic type is closed center.
Case IH Quadtrac 9380QT Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center |
|---|---|
| Hydraulic pressure | 2900 psi | 200.0 bar |
| Pump flow | 27 gpm | 102.2 lpm |
| Steering flow | 31 gpm | 117.3 lpm |
| Hydraulic valves | 4 |
Case IH Quadtrac 9380QT Hitch, Remote & Lift Specs
| Rear hitch type | IV |
|---|---|
| Rear lift at 24 inches | 17000 lbs | 7711 kg |
Case IH Quadtrac 9380QT Useful Hydraulic Calculations
| Steering flow vs pump flow | 114.8% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 629.6 lb per gpm |
| Estimated hydraulic horsepower | about 45.7 hydraulic hp from listed pressure and pump flow |
| Pump flow per listed valve | 6.8 gpm per valve |
Case IH Quadtrac 9380QT Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Valve / remote count comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Quadtrac 9380QT Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Articulated power steering |
|---|---|
| Brakes | Wet disc brakes |
Case IH Quadtrac 9380QT Hydraulic Capacity FAQ
Why is the Case IH Quadtrac 9380QT hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Quadtrac 9380QT, but pump flow is 27 gpm | 102.2 lpm, pressure is 2900 psi | 200.0 bar, system type is closed center, and lift is listed as 17000 lbs | 7711 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Quadtrac 9380QT hydraulics feel fast or slow?
The useful speed clue is 27 gpm | 102.2 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Case IH Quadtrac 9380QT hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 3,100 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH Quadtrac 9380QT?
On the Case IH Quadtrac 9380QT, 27 gpm | 102.2 lpm pump flow points to slower loader and cylinder movement, 2,900 psi pressure affects force more than speed, and 17,000 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Quadtrac 9380QT?
For implement matching, the useful checks are 27 gpm flow, 2,900 psi pressure, 17,000 lb listed lift, and 4 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Quadtrac 9380QT rear lift capacity strong?
The listed lift figure is 17000 lbs | 7711 kg, close to the 15,500 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Case IH Quadtrac 9380QT hydraulic remotes enough?
The Case IH Quadtrac 9380QT lists 4 for valves/remotes. That is slightly under the 5 benchmark, but still a workable/normal remote count for many setups.
Will the Case IH Quadtrac 9380QT hydraulics handle long hydraulic jobs?
The useful heat clues are 27 gpm flow, 2,900 psi pressure, and about 45.7 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Case IH Quadtrac 9380QT make on paper?
Using 2,900 psi and 27 gpm, the rough pressure-flow estimate is about 45.7 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Case IH Quadtrac 9380QT hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IV and listed lift is 17000 lbs | 7711 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
