The Case IH 2150 specifications include PTO power rated at 64 hp (47.7 kW), a partially synchronized transmission and a listed weight of 4,718 to 4,806 lbs.
Case IH 2150 key specifications
PTO power
64 hp (47.7 kW)
Displacement
244.1 cu in (4.0 L)
Transmission
partially synchronized
Fuel capacity
15.85 gal (60.0 L)
Weight
4,718 to 4,806 lbs
Wheelbase
81.7 inches (207 cm)
Rear PTO
independent
Case IH 2150 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
PTO power64 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement4 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity15.8 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight4,806 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase81.7 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 2150 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity60 L
Engine oil9.2 L
Case IH 2150 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Wheelbase207 cm
ROPS height248 cm
Ground clearance25 cm
Engine specifications
Bore/Stroke
4.134 × 4.547 inches (105 × 115 mm)
Rated RPM
2,350
Torque
200 lb-ft (271.2 Nm)
Torque RPM
1,200
Compression
17:1
Air cleaner
dual dry element
Oil capacity
9.7 qt (9.2 L)
Starter
electric
Starter volts
12
Firing order
1-3-4-2
Intake valve clearance
0.008 inches (0.203 mm, cold)
Exhaust valve clearance
0.008 inches (0.203 mm, cold)
Transmission options
Gear options
8 forward and reverse or 12 forward and reverse
Clutch
280 mm dry disc
PTO and hitch
Rear hitch category
Category I/II
Hitch control
position and draft control
2150V Rear lift (at ends)
5,575 lbs (2,528 kg)
2150E Rear lift (at ends)
5,463 lbs (2,478 kg)
Rear PTO speed
540, 750, or 1,000 rpm, 1.375-inch shaft
PTO engine speed
540 PTO rpm at 2,115 engine rpm
Hydraulics
Hydraulic type
open center
Valves
1 or 2
Pump flow
15.6 gpm (59.0 L/min)
Mechanical specifications
Steering
hydrostatic power
Trailer brakes
hydraulic (optional)
Electrical specifications
Electrical ground
negative
Charging system
alternator
Charging amps
55
Battery volts
12
Battery AH
100
Dimensions and weight
Ground clearance
9.9 inches (25 cm)
Hood height
51.3 inches (130 cm)
ROPS height
97.8 inches (248 cm)
Tires and tread
2150V Standard tires (ag)
Front: 8.25-16. Rear: 13.6R28
2150E Standard tires (ag)
Front: 10.5-15. Rear: 14.9R28
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
